Do you mean "can current flow in both directions"?
In theory, yes.
The terminals on a MOSFET are called the "Source", "Drain", and "Gate". Just as with a bipolar junction transistor (BJT) the direction of current flow will be based on the doping configuration of the semiconductor. In a MOSFET, the doping configuration can be either n-channel or p-channel, but with MOSFETS, they also come in a "normally on" or "normally off" configuration, which is specified by being either "depletion mode" or "enhancement mode", respectively.
A current which changes its direction of flow again and again is known as alternating current.
A diode is a "one-way valve" that allows electrical current to flow in only one direction. A diode placed in series between an AC voltage source and a resistive load will allow current to flow through the load in one direction and block the current when the polarity of the AC voltage changes.
Conventional current flow refers to a flow of positive charges. It is a kind of ficticious current. If - as is often the case - the real current is an electron flow (negative charges), then the conventional flow is a current in the opposite direction as the electron movements, since this would have the same effect (for example on the magnetic field, or on conservation of charge).
The electric current moves in the direction opposite to the flow of electrons by convention.When a potential difference is applied to a material which has "loose" electrons, the electrons move in a direction opposite to the potential gradient and the current moves in the opposite direction to the flow of electrons.This is how current flows in materials.
A; The base must be positive with respect to the emitter this condition will allow collector current to flow from collector to emitter. If the transistor manage to get saturated the current can flow in both direction. as a switch
it can exchange the current is much larger and has Avery low resistance when it is turned on.the mosfet is not removed from the circuit when the supply is on because it flow the high current.
When the flow of current is aways in one direction it is known as direct current.
Conventionally electric current was assumed to be a flow of positive charges. But in reality especially in metals electric current is due to the flow of negatively charged electrons. So direction of conventional current is opposite to the direction of flow of electrons. But in case of liquids as well as solids electric current is due the flow of both positive and negative ions.
We have suppose the current flow in opposite to the direction of flow of electron.AnswerA.C. current reverses direction every half-cycle.
A direct current involves change of flow in a single direction.
direct current
The terminals on a MOSFET are called the "Source", "Drain", and "Gate". Just as with a bipolar junction transistor (BJT) the direction of current flow will be based on the doping configuration of the semiconductor. In a MOSFET, the doping configuration can be either n-channel or p-channel, but with MOSFETS, they also come in a "normally on" or "normally off" configuration, which is specified by being either "depletion mode" or "enhancement mode", respectively.
Flow of the current.
The polarity of an electromagnet is determined by the direction of current flow. When current flows one way, the magnetic field is oriented in one direction, and when it flows the other way, the magnetic field is oriented in the opposite direction.
Current Density describe how charge flow at certain point since current density = I/A and the vector direction tells you about the direction of flow at that point.
DC current