could be a blown fuse or you could check by the break caliper your abs lines are there make sure the lines are not broke ripped torn etc. the lines lead to an abs sensor check the sensors make sure they are functioning properly
body control module located
call your local dealer
To fix a Mazda 3 ABS light 05 plate from staying lit you will need to see a dealer. They will need to use their computer to reset the code as long as the ABS light is faulty and not the actual ABS system.
Bring to a shop that has an ABS scanner to determine the problem
You can reset the ABS light in a 2000 Mazda 626 by unplugging the battery cables. You can also reset it by connecting a diagnostic tool to your car.
No, a Mazda 626 does not have fuses for ABS brakes. In fact, many Mazda models do not have fuses for ABS brakes.
Bring to a shop that has an ABS scanner to determine the problem
The Mazda ABS relay switch is located on the firewall in the engine compartment. The ABS relay switch will be on the passenger side of the firewall.
The ABS light is on because there is a problem with the ABS. The ABS will not function when the light is on. The light will remain on until the problem is fixed.
The TCS system is part of the ABS system - antilocking brake system - but be aware that a simple vacuum leak will be enough to trigger the TCS light to come on.
The ABS light is on because there is a problem with the ABS. The light won't go out until the problem is fixed. As long as the ABS light is on the ABS will not function.
the ABS sensor is bad.