16
4096
Net Mask
no
To Know any subnet of this IP you must provide the Subnet mask, otherwise it is impossible to know what is the subnet.
The subnet mask within the TCP/IP configuration is used to distinguish the ? from the host address.
That's not a valid subnet mask. Probably the subnet mask is supposed to be 255.255.192.0. You can convert each of the parts separated by dots to binary separately. Just use a scientific calculator, for example, the one that comes with Windows. To be a valid subnet mask, the binary equivalent must have a certain number of only ones, followed by only zeros.
255: 1111_1111 5: 0000_0101 1: 0000_0001 2: 0000_0010 Source IP address: 10.10.5.1 Subnet mask: 255.255.255.0 Subnet: 10.10.5.0 (host subnet) Destination IP address: 10.10.5.2 Subnet mask: 255.255.255.0 Subnet: 10.10.5.0 (destination subnet) The destination subnet address for 10.10.5.0 which is the same subnet as the host. Therefore, the packet stays in the LAN.
This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.
Ask Mr Clark or Cory or Adam Not Dale
Seems to me, I'm still learning, that the Class D subnet mask would be 224.0.0.0 or 1110 0000.0000 0000.0000 0000.0000 0000 in binary. The Internet has been using classless subnets for a while now, so it may not be as relevant as it once was.
If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.
199.16.24.0 net mask in binary is 11111111.11111111.1111111.1110000 that means our mask bits are 1+2+4+8+16 = 31 add one for the zero address giving a total of 32 possible ip addresses 2 of which are reserved so you have 29 possible addresses for the network
because that is the last number of the subnet. the last number in a subnet is used as the broadcast domain. the first number is also not usable. an example would be: id 192.168.20.XX subnet 0f 255.255.255.128 192.168.20.0 and 192.168.20.127 may not be used and 192.168.20.128 starts the next subnet making 192.168.20.128 and 192.168.20.255 not usable