answersLogoWhite

0

If you can run a knife around the edge of a cake and it comes out smooth and clean, then yes, it is done.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you measure cake flour for cake use?

Use a dry measuring cup, and level each one off at the top with a smooth edge so that it is exactly level.


Where did bundt cake come from?

In the 1966 Pillsbury Bake-Off, the Tunnel of Fudge Cake recipe baked in a Bundt pan won second place. It was then that the Bundt trend really took off.


Can you substitute buttermilk for oil in a cake mix recipe?

It can be done, but it's not the best. The texture will be different, and the taste will be extremely off.


Did remy from Cake Boss win the ultimate cake off?

Yes Remy won the Ultimate Cake Off!!


When was Off the Edge created?

Off the Edge was created in 1976.


What is the duration of Ultimate Cake Off?

The duration of Ultimate Cake Off is 2880.0 seconds.


What is the duration of Off the Edge?

The duration of Off the Edge is 1.28 hours.


When was Ultimate Cake Off created?

Ultimate Cake Off was created on 2009-08-03.


Can you fall off the edge off the world?

No, you cannot fall off the edge of the world. The Earth is a sphere, so there is no physical edge to fall off.


Do wakeboard bindings come off your foot?

It shouldn't come off while you are wakeboarding, but you should be able to take them off when your done.


When you frost your cake why does the top of the cake come off and gets mixed in the frosting?

That should not happen, and it does not need to happen. This probably occurs because the cake is either too dry, too crumbly / weak, or you are pressing and spreading the icing around too hard.


How do you remove the driver side door panel on a 1996 Subaru Legacy?

You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library. Though what if it still does not come off, after following the instructions in this book? In my case the panel is stuck along the top edge and does not come off. What is the trick to getting it off along the top edge?