0
If the formula of a metal phosphate is M3(PO4)4the forits metal chloride will be?
Wiki User
∙ 7y ago
Based on the formula of M3(PO4)4, that would mean the M has an oxidation number of 4+, so the metal chloride would take the form of MCl4
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
What jobs are new England most known for?
NewEnglandisknown forits fishing market and also Film, TV and Video jobs are known as well
What does CAR15 stand forIts a type of gun?
It is the Carbine (short rifle) version of the AR15. AR stands for Armalite Rifle. It is a semi auto rifle.
When body have 2ms accleration in 15 seconds with a velocity 30ms does the velocity of the car uniform?
Although the question is stated in a somewhat confusing way, we can state withconfidence that the velocity of the car is NOT uniform, because a value is given forits acceleration. 'Uniform' motion means zero acceleration.
What animal has a name that is 6 letters and the middle letters are rol g?
grep ^.rolg.$ /usr/share/dict/wordsbrolgabrol·ga">brol·ga">brol·ga   [brol-guh]nouna large Australian crane, Grus rubicunda, with silvery-gray plumage and a red patch on the head, noted forits elaborate courtship dance.
Do plants need healthy leaves to grow?
yes. it is important for a plant to have healthy leaves forits growth. plants absorb sunlight through stomata which is situated on the underside of the leaves! so if the leaves are not healthy enough to absorb sunlight then photosynthesis will not take place and because of no photosynthesis the plant wont get the vital elements for its growth and the plant might die!
What should you do if your friend is starting a relationship with your crush and the boy likes her?
* I am not the best person to talk to about this topic but If you have this problem you have to understand that the boy might like someone else. Boys take a bit longer to grow up and act there age. Remember you have the rest of your life to find someone for you. But just remember if you dont have a early relationship in your life then you will never have one then you will be a hobo and have none to love or to care forITS A TRUE FACT!!!!!!!!!
What animal has a name that is 6 letters long and the middle letters are rolg?
grep ^.rolg.$ /usr/share/dict/wordsbrolgabrol·ga">brol·ga">brol·ga   [brol-guh] nouna large Australian crane, Grus rubicunda, with silvery-gray plumage and a red patch on the head, noted forits elaborate courtship dance.
Describe a TCP connection sequence?
The connection establishment process actually accomplishesseveral things as it creates a connection suitable for dataexchange:o Contact and Communication: The client and server makecontact with each other and establish communication bysending each other messages. The server usually doesn't evenknow what client it will be talking to before this point, soit discovers this during connection establishment.o Sequence Number Synchronization: Each device lets theother know what initial sequence number it wants to use forits first transmission.o Parameter Exchange: Certain parameters that control theoperation of the TCP connection are exchanged by the twodevices.
Why does sun appears to be pot shape when it sets near sea?
-- A ray of light on a trip through the atmosphere almost always curves slightlydownward on its way.-- The thicker the atmosphere is, the more the light curves downward through it.-- Since you 'see' an object in the direction from which its light reaches you,and the light reaching you has always curved slightly downward on its way toyou, a distant object always appears to be slightly higher than it actually is.-- Near sunset, when the sun is low down on the horizon, light from the bottomof the sun's rim must reach you through atmosphere that is slightly thicker thanthe air through which light from the top of the sun's rim travels to you.-- So the light from the bottom of the sun is bent downward more than the lightfrom the top of the sun.-- So the bottom of the sun appears to you to be raised from its actual directiona little more than the top of the sun does.-- Which causes the complete rim of the sun to appear squashed, too wide forits height, too short for its width, egg-shaped, elliptical, "pot shape", etc.-- The sea has nothing to do with it. Only that you have a much better chance ofstill seeing the sun when it is low down and preparing to set into the sea, than youhave when there are buildings, trees, or hills in the way.
The songs lyrics are give me something to believe because you are living just to breath?
Believe - The bravery.Lyrics :The faces all around me they don't smile they just crackWaiting for our ship to come but our ships not coming backWe do our time like pennies in a jarWhat are we saving for [x2]There's a smell of stale fear that's reeking from our skins.The drinking never stops because the drinks absolve our sinsWe sit and grow our roots into the floorBut what are we waiting for? [x2][chorus:]So give me something to believeCause I am living just to breatheAnd I need something moreTo keep on breathing forSo give me something to believeSomething's always coming you can hear it in the groundIt swells into the airWith the risingRising soundAnd never comes but shakes the boards and rattles all the doorsWhat are we waiting for [x2]So give me something to believe.Because I am living just to breathe.And I need something more.To keep on breathing forSo give me something to believeI am hiding from some beastBut the beast was always hereWatching without eyesBecause the beast is just my fearThat I am just nothingNow its just what I've becomeWhat am I waiting forIts already doneOhSo give me something to believeCause I am living just to breatheAnd I need something moreTo keep on breathing forSo give me something to believe.
How do you change the bulb for the instrument panel on a 1995 Subaru Legacy wagon?
I'm doing it now on my 1996 Legacy. I had to order the bulds from Radio Shack. Remove the cup holder first and then you'll see that you have to unplug the wiring harness for hazards, blower and another one. They are little brown flat screw type bolts that are kinda flush to the panel. Twist and pull out with tweezers and you'll see you have to remove the bulbs manually. Hope this helps and that your year of car matches what mine is. Check this out:Replacing the lights behind the centerconsoleEvery major button or control in the center console should be backlit when the headlights are on.Sometimes the little bulbs burn out. The previous owner of my car demonstrated that they tend to burnout faster if you soak them with a can or two of cola. The good news is that with some care, you can fixthe burned out lights yourself. This page details the steps I followed for replacing several different lights.If none of the interior controls are lit up, check the dimmer ring on the headlight switch and makesure it is turned to the brightest setting. The interior lights don't show up very well during the daytime,so you may want to do this work in a dark or shaded location.General instructions for replacing the micro bulbsEach of the minature bulbs behind the buttons or switches in a Subaru has a base that is the right size forits location. I recommend replacing only one bulb at a time or keeping track of where each bulb base wasremoved from. You don't want to get poor lighting results because you plugged the wrong light base intoa given socket (even though it may fit). You may be able to buy the complete bulb assemblies at aSubaru dealer, but in my case I was trying not to put any more money into these repairs than I had to.1. Remove the bulb to be replaced by twisting it ~1/8th turn counterclockwise. If the bulb doesn'tfall out of its socket, you may need tweezers or fine pliers to grab the base of the bulb and removeit.2. Use a pin or fine screwdriver to unwrap the little wires from their canals in the base of the lightassembly. Once the wires are more or less straight, you should be able to pull the bulb out of thebase.3. When separated, the base and removed bulb will look something like this:Base: Bulb:4. Radio Shack stores sell micro bulbs that will fit and work very well as replacement bulbs, butyou'll have to fit them into the Subaru light bases. They are Radio Shack #7219 and come in apackage of two. The bulbs are 12 volts · 60 mA. The other number on the package is 272-1092C,http://www.med.uc.edu/pstp/students/fortner/rulights.htm (1 of 4) [6/29/2003 7:17:32 AM]Subaru Salvation Projectalthough I don't know if that matters or not. The 2-pack should be less than $2.5. The Radio Shack bulbs are slightly shorter than the Subaru bulbs, so you may need to cut a shortpiece of plastic to make the bulb stick out as far as the original bulb sticks out. I used a little ringcut from the ink tube on a Bic Rollerstick and slid it over the wires like this:6. Some of the lights have little green covers on them (the ones behind the climate control switchesare like this). The green covers will fit the Radio Shack bulbs very well and will also make iteasier to determine how much bulb should stick out of the base.7. Feed the wires from the Radio Shack bulb through the holes in the light base (one wire per hole toavoid shorting out the circuit).8. Wrap the wires through the grooves in the light base, making sure to follow the path that theoriginal wires were wrapped along. The loops on the bulb side of the base are the most important,since they form the electrical contact with the light socket. Before you trim the excess wire, itshould look something like this:9. Trim the excess wires, make sure the two wires don't touch each other at any point, and plug thelight assembly back into the socket it came out of.10. Turn the base ~1/8th turn clockwise to lock the light in position.Foglight, Rear Defroster, or Cruise ControlswitchesAll of these switches have two light bulbs: one for backlighting the symbol or text, another for the littlelight that indicates the button is in the "on" position.1. Remove the switch from the instrument panel and disconnect the plug connected to the rear of theswitch. It may help to remove the instrument panel first, so that you can get at the back side of theswitches and pop them out more easily.2. Remove the light assembly and replace the bulb according to the general instructions.3. Reconnect the plug into the back of the switch and test for lights.4. Pop the switch back into place and reassemble the instrument panel.http://www.med.uc.edu/pstp/students/fortner/rulights.htm (2 of 4) [6/29/2003 7:17:32 AM]Subaru Salvation ProjectHazard Light switchThis switch has only one bulb that backlights the symbol. The only difficult part is getting the switch outso you can work on it (the bulb is located on the top side of the switch so you have to disassemble thepanel pretty much completely).1. Remove the cup holder, including the two screws and the socket that holds the tray.2. Remove the whole center vent assembly (entire piece surrounding the heater controls, vents, andhazard switch). It should pop out fairly easily (anchor points seem to be beside each vent).3. Unplug the wires from the back of the hazard switch.4. The next trick is to get the vent assembly apart from the trim piece that holds the hazard switch.m Remove the two black screws holding the bottom of the vents to the trim piece.m Loosen or remove the 4 small screws that hold the vent top & bottom together (two goldcolored screws on each side).m Look in through the back of each vent and note that there are about 4 pop-in type "teeth"holding the vent snapped together with the trim piece.m Pop the vent assembly loose from the trim piece.5. You should be able to get at the light bulb (on top of the switch) without detaching the hazardswitch from the trim piece, but it may be easier to go ahead and unscrew the two screws holdingthe hazard switch in place on the trim and remove the switch.6. Remove the light assembly and replace the bulb according to the general instructions.7. Reconnect the plug into the back of the switch and test for lights.8. If you detached the hazard switch from the trim, reattach it.9. Pop the vent assembly back onto the back of the trim piece, making sure that all the "teeth" popback into place.10. Replace and tighten all screws removed from the whole center vent/trim assembly.11. Pop the whole center vent assembly back into place.12. Reinstall the cup holder socket and screws and slide the cup holder tray back into place.Climate control panelThe entire panel for the vent selection, fan speed, and internal temperature control is lit by three bulbs atthe back of the control assembly. Replacing them is a fairly involved repair, but worth it if you want tosee those controls at night. I think the little indicators beneath each vent selection (floor, vent, recirc,defrost, etc.) are LEDs. All of mine work, so I haven't had to mess with them. The light in the A/C switchis also separate, and mine works so I haven't had to mess with it either.1. Remove the center vent and trim according to steps 1-3 for replacing the hazard switch.2. Pop the sliding knob off of the temperature control slider.http://www.med.uc.edu/pstp/students/fortner/rulights.htm (3 of 4) [6/29/2003 7:17:32 AM]Subaru Salvation Project3. Remove the 4 screws holding the control panel in place.4. There are three plugs going to the back of the control panel (one for fan speed control, one forA/C, one for all other switches). Unplug all three.5. The cable attached to the temperature slider will prevent you from removing the whole controlpanel assembly.6. In order to pull the panel out, you need to disassemble the sliding part from the rest of the panel.This is somewhat complicated.m There is a cover made of softer black plastic on top of the back part of the assembly. Workwith the clips near each end to free this piece and slide it up and out.m Looking at the top of the assembly, you should now see a small circuit board held verticalbetween two supports.m On the back side of each support is a tab that secures the ends of the circuit board.m As you lift upward on the small circuit board, use a small screwdriver to pry the tabsoutward (away from the back of the assembly) to release the ends of the small circuit boardand slide the circuit board up and out of it supports. It will remain attached by a short greyribbon wire.m Remove the two small silver screws from the bottom of the assembly.m Lift the little clips near where those screws were and slide the front part away from the restof assembly, leaving the A/C switch, the slider and cable still in the dashboard.7. Now you should be able to look at the back of the main circuit board (across the whole back ofthe vent control assembly) and see the bases for three bulbs.8. If you don't know which bulbs are burned out, plug in the main plug to the little circuit board andcarefully test the lights (don't short anything out on any of the wires or pins).9. Remove any burned out light assemblies and replace the bulbs according to the generalinstructions. The light nearest the fan speed switch has a considerably longer base than the others,so don't get this mixed up with other bulbs. All three of these lights should have little greensheaths covering the bulbs.10. Reconnect the plugs into the back of the assembly and test for lights (again, be careful not to shortthings out).11. Unplug the system again and reassemble it. Once you have slid the front and back parts of theassembly back together and replaced the small silver screws, slide the small circuit board downinto its supports. Don't forget to put the black plastic cover back on behind the vent controlassembly, and the temperature slider knob back in place.12. Plug all three connections back into the back of the whole climate control assembly, and mount itback in place with the four screws.13. Replace the center vent assembly, cup holder socket and screws, and cup holder tray.
