0
If the peak voltage of a sine wave is 100 volts then the instantaneous voltage at 150 and deg is volts?
Wiki User
∙ 7y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
If a sine wave has a peak value of 220 volts what is the route means square value?
If the Peak to neutral voltage is 220 volts, the root mean square voltage is 155.6 volts (sqrt(220)).
What is the peak value of the input to a half wave rectifier if the half wave rectifier is 10V?
In this case, the peak voltage, which is half the peak to peak voltage, is 100 volts. Additionally, the half-wave rectifier will only provide an output for half the input cycle. In the case of a full wave rectifier, the RMS output voltage would be about 0.707 times the value of the peak voltage (100 volts), which would be about 70.7 volts. But with the output operating only half the time (because of the half wave rectification), the average output voltage will be half the 70.7 volts, or about 35.35 volts RMS.
Are peak-to-peak and rms voltage measurements the same?
No, the peak-to-peak voltage is 2sqrt(2) times as much as the rms for a pure sine-wave.
What is the peak voltage of a 240 VRMS sine wave?
To calculate the peak voltage of an RMS voltage in a sine wave simply multiply the RMS voltage with the square root of 2 (aprox. 1,414) like this: 240 x 1,414 = 339,4 V RMS x sqr.root of 2 = peak voltage
How rms voltage related to peak voltage?
The average voltage is the rms voltage.Volts peak = volts RMS times 1.414Volts RMS = volts peak times 0.7071Use the link below to an RMS voltage, peak voltage and peak-to-peak voltage calculator.********************************The average voltage is not the r.m.s. voltage.The average voltage of a sine wave is 0.636 x the peak value. Conversely, peak voltage is 1.57 the mean or average.
What is the instantaneous voltage of a sine wave at 25 degrees if its peak voltage is 30 V?
12.68V 3o * sin25 = 12.67854785
If a sine wave has a peak value of 220 volts what is the route means square value?
If the Peak to neutral voltage is 220 volts, the root mean square voltage is 155.6 volts (sqrt(220)).
What is effective voltage?
It is the 'as if' voltage in an AC circuit. Referred to as Vrms 120 volts in your house is Vrms, the effective voltage, 'as if' it were DC 120V, can do the same work. But 120VACrms is a sine wave with a peak voltage much higher than 120 volts.
What is the rms voltage for 144 volts modified sine wave?
if that 144 is the peak voltage if its a sine wave the rms voltage is that voltage divided by sqrt(2) if not a sine wave (modified) you must find the area under the curve by integrating a cycle of that wave shape (root mean squared)
What is the relationship between peak to peak and peak voltage for a sine wave?
The RMS (root mean square) of the peak voltage of a sine wave is about 0.707 times the peak voltage. Recall that the sine wave represents a changing voltage, and it varies from zero to some positive peak, back to zero, and then down to some negative peak to complete the waveform. The root mean square (RMS) is the so-called "DC equivalent voltage" of the sine wave. The voltage of a sine wave varies as described, while the voltage of a DC source can be held at a constant. The "constant voltage" here, the DC equivalent, is the DC voltage that would have to be applied to a purely resistive load (like the heating element in a toaster, iron or a clothes dryer) to get the same effective heating as the AC voltage (the sine wave). Here's the equation: VoltsRMS = VoltsPeak x 0.707 The 0.707 is half the square root of 2. It's actually about 0.70710678 or so.
What is the difference of peak and rms value?
RMS stands for "Root of the Means Squared", and is a mathematical method of defining the "operating" voltage of a sine wave power source. Typical home lighting and outlet voltage presently is 120 VAC (volts alternating current), 60 Hz. (Hertz, formerly referred to as "cycles per second".) But the PEAK voltage is the absolute maximum voltage at the "peak" of each sine wave of voltage. Mathematically, the "Peak" voltage is 1.414 (which is the square root of the number 2) times the RMS voltage, and conversely, the RMS voltage is 0.707 times the PEAK voltage.
What is the peak value of the input to a half wave rectifier if the half wave rectifier is 10V?
In this case, the peak voltage, which is half the peak to peak voltage, is 100 volts. Additionally, the half-wave rectifier will only provide an output for half the input cycle. In the case of a full wave rectifier, the RMS output voltage would be about 0.707 times the value of the peak voltage (100 volts), which would be about 70.7 volts. But with the output operating only half the time (because of the half wave rectification), the average output voltage will be half the 70.7 volts, or about 35.35 volts RMS.
Are peak-to-peak and rms voltage measurements the same?
No, the peak-to-peak voltage is 2sqrt(2) times as much as the rms for a pure sine-wave.
What is the approximate peak-to-peak voltage of a 2 VRMS sine wave?
the answer is 5.6vp-p
What is the conversion of rms voltage to Peak to Peak voltage?
Assuming sine wave (it is different if not): Vp-p = 2.828 * Vrms
What is the peak value of a sine wave that has a peak to peak value of 60v?
30 volts provided zero crossing is at midpoint.
What is the peak voltage of a 240 VRMS sine wave?
To calculate the peak voltage of an RMS voltage in a sine wave simply multiply the RMS voltage with the square root of 2 (aprox. 1,414) like this: 240 x 1,414 = 339,4 V RMS x sqr.root of 2 = peak voltage
