Generally, plastic lampholders take up to a 60 watt lamp.
Porcelain lampholders will accommodate 100 watt lamps.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
If you do this work yourself, always turn off the power
at the breaker box/fuse panel BEFORE you attempt to do any work AND
always use an electrician's test meter having metal-tipped probes
(not a simple proximity voltage indicator)
to insure the circuit is, in fact, de-energized.
120 volts is a standard voltage in US for normal house hold electric outlet. , So you can buy from 0 watts to 1000 watts for 120Volts socket . However the bulb you want to buy depend on the Lamp holder , rating of the socket and where the holder is installed, how much light you need etc . Check the max Watts rating on your socket or Lamp and determine the correct Wattage bulb to use. No one can tell you what wattage bulb to use with out looking at your socket or Lamp. The formula for Watts = Volts x Amps Check out the low wattage Compact Fluorescent Light Bulbs which will consume very low engergy and save money in a long run http://www.energystar.gov/index.cfm?c=cfls.pr_cfls
The label 60 watts bulb max is referring to each individual bulb, not the total in the light fixture.
from a WATTAGE point of view, yes; it is always electrically safe to switch to a smaller wattage if the larger wattage was setup in an approved manner. from a HEAT point of view, don't change a lamp until it cools off unless you have proper gloves yes, but not the other way 'round
By exceeding the designed wattage by that much, you risk burning a fuse, burning the wiring harness, or in some cases melting the headlamp assembly and socket (this last one happened to my wife's car).
It is best to calculate on the side of caution, so I will assume you are talking about a 110V circuit, which can be anywhere from 105V to 125V. We'll assume 125V. So we're talking 5000W maximum load
120 volts is a standard voltage in US for normal house hold electric outlet. , So you can buy from 0 watts to 1000 watts for 120Volts socket . However the bulb you want to buy depend on the Lamp holder , rating of the socket and where the holder is installed, how much light you need etc . Check the max Watts rating on your socket or Lamp and determine the correct Wattage bulb to use. No one can tell you what wattage bulb to use with out looking at your socket or Lamp. The formula for Watts = Volts x Amps Check out the low wattage Compact Fluorescent Light Bulbs which will consume very low engergy and save money in a long run http://www.energystar.gov/index.cfm?c=cfls.pr_cfls
u multiply your voltage times max current (amps) and this gives u max wattage.
The wattage and the output provided are the major differences between these two units.
300 watts
Yes unless you want to smoke your subs
The label 60 watts bulb max is referring to each individual bulb, not the total in the light fixture.
according to the owner's manual 600 w max.
Generally electrical sockets are designed to handle a max wattage and are labeled that way. A 25 w bulb will draw more power than the socket is designed for and could result in damage to the electrical appliance and fire.
MAX Light Rail was created in 1986.
from a WATTAGE point of view, yes; it is always electrically safe to switch to a smaller wattage if the larger wattage was setup in an approved manner. from a HEAT point of view, don't change a lamp until it cools off unless you have proper gloves yes, but not the other way 'round
Some Recessed lights have a thermal cutoff. (Some flush mount ceiling lights too) Use a smaller wattage bulb.That is all that can be said without more info.
Some Recessed lights have a thermal cutoff. (Some flush mount ceiling lights too) Use a smaller wattage bulb.That is all that can be said without more info.