If you get gas to the intake but not to the spark plugs (assuming that you have injector pulse and normal injector operation) you probably have such a condition that the engine valves are not opening and closing normally. Check for a broken timing chain or other cause of cam not turning. If cam is turning, check for broken or severely bent pushrods or broken valve rockers or broken valve springs or valves 'sucked' into cylinders. You could also have a severe engine problem such as damage pistons, rings, block, head, or some such similar.
no
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it
There should be advance marks on the harmonic balancer, and timing marks on both timing chain gears.
It has a chain and not a belt. No maintenance required.
on the top of the intake manifold next to the main injector
It is mounted on the left rear top side of the intake. It will have a plug wire coming out of it and going to the distributor cap.
Under the upper intake manifold, attached to the bank of injector poppets, aka "the spider".
top section of timing chain cover in front of the intake manifold
how much horse power does a stock 4.8 liter vortex Chevy engine have
Chevy 350s have timing chains,not belts. It is designed for the life of the motor. If it is "streched" , the cam timing would be slightly off. Would need a degree wheel, a dial indicator and stock cam specs. intake/closing.
Answer timing 95 4.3 vortec Chevy blazerTiming is non adjustable, period. The high voltage switch ( or known as the distributor) is pinned into lower intake and cannot be moved. The timing is controled by the computer.
what year did chevy come out with the vortex v6