Want this question answered?
An ammeter is always connected in series and a vlotmeter in parallel
The difference between a series and parallel circuit is that a series circuit is connected in such a way that the same current intensity flows through the elements while a parallel circuit is connected in such a way that the same potential appears across their terminals.
When capacitors are connected in parallel, the total capacitance in the circuit in which they are connected is the sum of both capacitances. Capacitors in parallel add like resistors in series, while capacitors in series add like resistors in parallel.
A resistance 'network' consists of a number of resistors connected together in series, or in parallel, or in series-parallel, or as a complex circuit. A 'complex' circuit is one that is not series, parallel, or series-parallel.
If you are asking how a voltmeter should be connected in a circuit, then the answer is that it should be connected in parallel with the device across which you want to determine the voltage. This applies whether the circuit is d.c. or a.c.
In principle, it is infinite. I have not connected a parallel circuit in ages.
Parallel to each other.
If additional resistance is connected in parallel with a circuit the supply voltage will decrease?
No change in supply voltage as additional resistance is connected in parallel circuit.
A circuit in which loads are connected side by side is known as a parallel circuit.
A circuit connected in a single path is called a series circuit. In a series circuit, the current flows through each component in sequence, providing only one path for the electricity to follow. If one component fails, the entire circuit is disrupted.
Ammeter is coneccted in series with circuit but Voltmeter is connected in parallel.
in parallel
Zener is connected in parallel to the circuit
Voltmeters are connected to simple series circuits the same way they are connected to any circuit. They are connected in parallel with the portion of the circuit for which you wish to measure the voltage drop.
An ammeter is always connected in series and a vlotmeter in parallel
For a circuit breaker to protect anything, it must be wired in series with whatever it is protecting.