Want this question answered?
Sub arc welding is a process in which the welding actually occurs while submerged under a layer of flux. Not only does this prevent oxygen from entering the weld and thus porosity, but it also keeps the dangerous arc from sputtering and spattering from the weld.
SAW welding is a type of arc welding while ERW welding is spot or seam welding. SAW stand for submerged arc welding while ERW stands for electric resistance welding.
4000ft
Yes. However, there are paints designed to be compatible with welding as they are designed to protect the surface of the plate from corrosion while in storage. In every code or specification, it is specifically stated that welding should be done on clean metal. Welding over paint is discouraged.
"While using welding equipment, you should always wear safety googles and protective gloves." Make sure you have on a welding jacket and long pants when you're using welding equipment. Those sparks can be very dangerous.
Should rescue, apply emergency Procedure and call an ambulance.
you will be ok if you waer a welding mask
WPS is welding procedure specification while PQR is procedure qualification records is all about welding and denotes design when it comes to WPS and Mechanical testing of the design when it comes to PQR. WPS is the design of welding joint, process of welding, welding position, steel shape and material symmetry, speed of welding, welding electrodes and filler and many more welding parameters while PQR is a complimentary to WPS. PQR will be the one to be tested mechanically and will finally validate if the WPS viable design of welding.
When welding one should always wear certain clothing. Leather boots (steel toe desirable), work pants (such as jeans) that cover the top of the boots, heavy cotton long sleeve shirt, welding beanie, gloves, and safety glasses. In most instances these items will protect you from sparks and weld spatter whether you are welding on a flat, vertical or overhead surface. A leather jacket can be worn to protect your shoulders and arms. Molten metal should not be falling if you are welding correctly. If you are sitting, while welding, a leather apron should be used.
When two pieces of metal are joined by welding they become one as if they were made that way. Welding replaced riveting and reduced the amount of metal used while producing a stronger joint.
No, Forge welding is the simplest form of welding where two metals are heated to a state than can be forced to meld into each-other such as hammering or by other mechanical means such as a press. MIG Welding is short for Gas Metal Arc Welding (GMAW). This is a process which uses electricity to melt the parent metal and the electrode (wire) while shielded by a inert gas to keep contamination's (our atmosphere (aka air)) out of the weld puddle. Forge welding uses brute force and heat to join metals while MIG welding uses electricity and a shielding gas.
while doing the welding ,the weld metal should be deposit in the weld pool of parent material and electrode.In some type of welding like TIG ,the electode is not consumable ,it is used to create arc betwenn the electode and the parent material.In such cases,the filler metal or wire is used to join the parent material