You should get a 1 watt amp so I don't have to listen to your plastic BS "Boom Boom" noise and rattle as you ignorantly careen down the street, blissfully unaware of whats going on around you.
it should say on the ballest/ transformer located in the fixture somewhere
According to MLA standards, the top right and left margins of your works cited list should each be set to 1 inch. The entire document should have 1-inch margins on all sides.
The bike that you should think of buying an active 9 year old is a 24-inch wheel bike.
The Kicker 08DS12L72 has dual 12 inch enclosures.
If you are thinking of buying a 24-inch Television from Best Buy, you should get a Vzio and a flat screen. They are around 140 dollars. You can use the giftcard and then pay 40 dollars on top of it.
These curtain rods may be purchased in the following lengths: 48 inch, 54 inch, and 60 inch.
Not much and no ones buying them
It depends on each map. It should show up in the key.
The most popular saw is a 12 inch compound miter saw like the Makita LS1221 (about $350 or so). If the molding is not terribly large, a 10 inch dual sliding compound miter saw will do the job well (example Makita LS1016L, about $550 - 600). The dual sliding saws are really designed for cutting crown molding.
DIP stands for Dual Inline Package. Most often, the pins are on 0.1 inch centers, with two rows of pins that are either on 0.3 inch centers or 0.6 inch centers.
Probably an T135. Trust me, you don't want to carry around a 15.6 inch laptop.
There are 25.4mm to one (1) inch, so there would be approximately six (6) 4mm beads per inch. If buying a 16" hank of 4mm bicone beads, you would be buying approximately 100 4mm beads.