Want this question answered?
Most are in mm or /32 of an inch.
6/32 inch. it is a measurement of tread depth.
On or before your country's legal minimum requirement for tread. If in doubt see out a qualified fitter to check the tread depth for you
Purchase a tread depth gauge from your local auto parts store. It will measure in 1/32" increments. Take measurements at the inside, middle and outside of tire treads.
It is the depth of the grooves in the tyre.
Generally you replace them every 30,000 miles. You can also tell if the tread is worn down. You can check the depth of the tread with a penny.
The minimum tyre tread depth in the UK is 1.6mm.
In Indiana, the legal minimum tire tread depth is 2/32 of an inch. It is recommended to regularly check tire tread depth to ensure safety and compliance with the law.
That depth present on a new tyre.
Minimum tread depth for all 4 tires is 2/32"
It is the rubber marker within the tread to show tread depth. It is also known as a tread wear indicator
The treads are generally about a half inch deep. To check for safe tread depth use a penny, if you can't see the top of the head of Abe Lincoln then the tread is fine.