255.255.254.0
172.24.127.254/18
That is mainly used for larger networks. For a home network, just assign the IP address manually.Auto-obtaining an IP address requires configuring a DHCP server - the machine that will assign those addresses, out of a specified address pool.That is mainly used for larger networks. For a home network, just assign the IP address manually.Auto-obtaining an IP address requires configuring a DHCP server - the machine that will assign those addresses, out of a specified address pool.That is mainly used for larger networks. For a home network, just assign the IP address manually.Auto-obtaining an IP address requires configuring a DHCP server - the machine that will assign those addresses, out of a specified address pool.That is mainly used for larger networks. For a home network, just assign the IP address manually.Auto-obtaining an IP address requires configuring a DHCP server - the machine that will assign those addresses, out of a specified address pool.
The Logical address is what we assign to the Network device to identify. for example IP Address.
The Logical address is what we assign to the Network device to identify. for example IP Address.
255.255.255.0
To have control and can easily be traced up.
yes
No, end devices cannot have .0 address assigned to them. It loosely refers to the entire network subnet.
the ip address 172.0.0.2 is the address private in a localhost who you can assign to devices such as routers, computers ... depending on the network configuration
When you set up a sub network you decide upon the subnet mask and this determines the network address (all zeros in the subnet portion of the address) and the broadcast address (all ones in the subnet portion of the address). When you assign the host addresses in your subnet, then you use the addresses between the network address and the broadcast address.
No, Windows normally assumes that the network uses DHCP and it attempts to find a DHCP server on the network. If it cannot find one it will eventually assign a 169.x.x.x address but it will not assign the gateway or the DNS addresses when it assigns the 169.x.x.x address.
Its very simple one when the host connects to the network it is DHCP dynamic host control protocol which is used to assign the IP address to the address seeking hosts in the network. it simply take any IP address from the pool of IP address and assign on to the host on lease based after using this must be sent back to the DHCP server ( your router in most cases )