The Northstar is a good motor, but they do blow head gaskets some times. If the coolant is going above about 230 degrees, or if you are having problems keeping the coolant filled, it sounds like you need head gaskets. The problem is caused by old coolant corroding the head bolt threads out of the block, and the head bolts pull out, releasing the clamping force on the gaskets.
Have a garage check the coolant for exhaust gas - this is the best way to diagnose the problem.
The maximum tosing capacity of the 2010 Cadillac SRX is 3500 lbs..
The maximum tosing capacity of the 2011 Cadillac SRX is 3500 lbs..
The maximum tosing capacity of the 2012 Cadillac SRX is 3500 lbs..
3150 to 3500 in good shape
HG replacement on a Northstar is not a trivial job. The engine should be pulled. Re-tapping the head bolt holes MUST be done. At a typical dealer, it's a $3500-$5000 job, with I believe a 40-hour book.
Follow the main hose to the top of your engine .Take of the two screws and there it is replace with new thermostate and gasket .Use blue gasket sealer.
58 minutes 20 seconds.
59 minutes
This is, in a word: impossible.
alot of time and money an engine isn't cheap I have checked it for my 1994 Eldorado with some engine rebuild companies in the Greater Toronto area, and the quotes I have gotten range from 3500 - 4000 CAD. Includes all parts and labour, but need to add HST. I'm starting to look at it because to replace the oil pan gasket and to repair a problem with loss of vacuum pressure, I'm already looking at over $3000. So to have the entire engine rebuilt with a 1 year warranty, I think it is proactive. Ken
It should take about an hour to change the intake manifold gasket. This part can be replaced by taking off the intake manifold cover, cleaning the old gasket off and sealing a new gasket in the space and tightening the bolts. When other things are in the way, like the alternator, it will take longer.
9 hours and 25 minutes 9 hours and 25 minutes