True
For maximum comfort and safety, the bench is fully adjustible and customizable. Exercizers can adjust the seat and bench, as well as the safety spotters and weight crutches.
The neutral safety switch is part of the transmission range sensor and is not adjustable. It is mounted on the valve body inside the transmission.
True
Jack the Neon up and remove the wheel. Keep the vehicle on a stand for safety. Unbolt the caliper and slide it off. Remove the brake pads from the caliper and replace them with new pads. Reinstall the caliper. The caliper is not adjustable, however you can bleed the lines for possible air in the fluid.
The adjustable head rest.
The clutch safety switch is on the clutch pedal shaft. It is a small black box with a plunger coming out of it. When you push the clutch down, the clutch safety switch connects the starter and it should turn over. If it doesn't you may have to replace it or adjust it. It's adjustable. Just adjust it until the red plunger is fully retracted out of the switch when the clutch pedal is pushed in all the way.
For safety and comfort
You can use a safety pin to do it.
it is on the left side of the transmission it will have wires plugged in to it left the left side of the van by running it up a ramp this will keep you from loosing a lot of transmission fluid a socket will remove it it just screws in the transmission
redundant vehicle
A vehicle safety device
California Vehicle Code 27360 pertains to the use of child safety seats in vehicles. It mandates that children under a certain age or height must be secured in an appropriate child safety seat while riding in a vehicle. Failure to comply with this code can result in fines and penalties.