0
What else can I help you with?
How do you reset the service light on a 2006 Renault clio?
To reset the service light on a 2006 Renault Clio, turn on the ignition without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, turn off the ignition and then start the engine; the service light should be reset. If the light remains on, you may need to repeat the process.
How do you reset airbag light on a Renault clio?
To reset the airbag light on a Renault Clio, first ensure that the ignition is turned off. Then, disconnect the car battery and wait for about 10-15 minutes to allow the system to reset. Reconnect the battery, turn on the ignition, and check if the airbag light is off. If the light persists, it may indicate a deeper issue that requires a diagnostic scan.
How do you reset the service light on a 2003 Renault Clio?
To reset the service light on a 2003 Renault Clio, first turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within 5 seconds. After doing this, turn the ignition off and then start the engine to ensure the service light has been reset. If the light remains on, repeat the process.
How do you reset the service indicator light on a 2008 Renault mascott van?
To reset the service indicator light on a 2008 Renault Mascott van, first, turn the ignition key to the "ON" position without starting the engine. Then, press the accelerator pedal three times within 10 seconds. Turn the ignition off, and the service light should be reset when you turn the ignition back on. If the light remains on, you may need to repeat the process or consult the vehicle's manual for specific instructions.
How do you reset service light on Renault megane 2001?
To reset the service light on a 2001 Renault Megane, turn the ignition key to the "On" position without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while still holding the button. Keep holding the button until the service light blinks and then goes out. Release the button, and the service light should be reset.
What does it mean when my Renault Laguna battery charge warning light comes on aswell as the stop light?
Your alternator is defective and not recharging the battery. Have the alternator checked.
How do you reset the service light on your 2001 Renault Megane 1.6 16v automatic hatchback?
To reset the service light on a 2001 Renault Megane 1.6 16v, turn the ignition key to the "On" position without starting the engine. Press and hold the trip reset button on the dashboard until the service light blinks and then goes out. Release the button, turn off the ignition, and start the engine to ensure the service light is reset. If the light remains on, repeat the process.
How do you reset the spanner light on a Renault Clio?
To reset the spanner light on a Renault Clio, first turn on the ignition without starting the engine. Then, press the accelerator pedal fully three times within five seconds. After this, turn off the ignition and start the engine to verify that the spanner light has been reset. If it remains on, the procedure may need to be repeated or there may be an underlying issue that requires attention.
What does it mean when my Renault Laguna battery charge warning light comes on?
battery is loosing power, probably there is power thief
How do you reset service change oil and spanner light on Renault laguna 11?
ignition on.. using button on end of stalk scroll through to service indication.. press button at least eight times... ignition off.. ignition back on and all reset
Renault Clio 172 Cup your Hazzard Light button is jammed on any ideas opposed to going to Renault?
I would try another hazzard switch,if not cured then the body computer could be at fault,renault call it the UCH.
How toReset the abs light on Renault clio?
To reset the ABS light on a Renault Clio, first ensure that the issue causing the light to illuminate is resolved. Then, disconnect the car battery for about 10-15 minutes to reset the electronic systems. Reconnect the battery, turn on the ignition, and check if the ABS light has turned off. If the light remains on, it may indicate a persistent issue that requires diagnosis by a professional.
