After a repair has been made on a Renault Laguna the service light will need to be reset. To do this plug the diagnostic tool into the computer and reset the light.
How do you reset the service light on a 2001 Renault Clio?" and can you take your seat out and take the air bags out and how is it done
Both DCi and DXi Renault HGV vehicles the service reset is a manual procedure using the dashboard instruments.
Typmy transponder chip has been damaged and my renault kangoo wont start now, how do i bypass the immobilizer so it will start
The key is faulty or the immobilizer will not accept the code. remove the battery for 30 mins to allow the system to reset.
To reset the seat belt warning light on a Renault Kangoo, first ensure that all seat belts are properly fastened. Then, turn the ignition key to the "ON" position without starting the engine. Press and hold the seat belt warning reset button, typically located on the dashboard or near the steering column, until the warning light turns off. If the light remains on, consult the vehicle's manual for specific instructions or check for any underlying issues with the seat belts.
You can reset the service light by bringing of the oil life monitor on your display. Hold the scroll button in until the oil life goes to 100 percent. This should reset your service light.
When you turn on the ignition the service indicator lights up, then press the reset button in the instrument until the mileage resets. This takes around 15 secs so be patient!
To reset the service light on a 2003 Renault Megane, turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard until the service light begins to flash, then release the button. After a few seconds, the light should turn off. If it doesn't, repeat the process to ensure the reset was successful.
Have vehicle scanned to determine the problem
To reset the service light on a 2001 Renault Megane 1.6 16v, turn the ignition key to the "On" position without starting the engine. Press and hold the trip reset button on the dashboard until the service light blinks and then goes out. Release the button, turn off the ignition, and start the engine to ensure the service light is reset. If the light remains on, repeat the process.
Auto Zone will check your computer codes for FREE. and reset them if you ask them too.