I think it needs only three sensors. Place each sensor at 120 degrees apart. senseor A at 12'O clock position, senser B at 4' O clock position and Senser C at 8' O clock. Before start spinning the wheel identify the location of the colors on the sensers two of them will be one color (say black) and one will be the other color (white). Before start spinning the disc say sensor A and B are at the same color and C is other color. Start spinning the disc whatever direction you like. Keep on reading the colors when the color on A changes read the color on sensor C if C didnt change the color the disc is spinning in the clockwise direction. For anticlockwise read the sensors B and C. ======================================= I would place 2 sensors (A & B) at circumference, place A @12'O clock position and B @3'O clock position. Get the time (TA1) when color of A changes then the time (TB1) when color of B changes and the time (TA2) when color of A changes again. If ((TB1 -TA1) < (TA2-TB1)) then disk is spinning clockwise else anticlockwise. =================== No no - you only need two sensors. You place them close together. Once the first sensor to fire on black followed by the second sensor shortly will indicate the directional rotation of the disk easily. This is common place in industrial automation. They even sell single sensors that have two detectors on them for this purpose.
suppose, imagine, suspect, assume
If the partnership is a general partnership, all partners assume unlimited liability. However, if the partnership is a limited partnership, one or more of the partners assumes unlimited liability
If the partnership is a general partnership, all partners assume unlimited liability. However, if the partnership is a limited partnership, one or more of the partners assumes unlimited liability
presume, believe, think, expect, suppose, imagine, fancy, take for granted
presume, think, believe, expect, suppose, imagine, fancy, take for granted
no gas entering piston chambers or no spark in the spark plugs. I assume the starter is spinning the engine?
limited partner
If you assume both bullets are stable and flying point forward, the spinning bullet will have more drag; HOWEVER, the whole purpose of spinning the bullet is to keep it stable and point forward. If you do not do this, the bullet yaws and wobbles wildly drammatically increasing the drag. Therefore, in actual practice, the spinning bullet has less drag because it remains stable and point forward whereas the unspun bullet is unstable and wobbles/tumbles.
I assume you mean the sensors related to the SIR (airbag) system? There are two discriminating sensors left and right, just in front of the radiator along the crossmember, and one arming sensor module above the transmission, at the center of the transmission crossmember.
You would assume that the holes that ecstasy eats into your brain would be punishment enough. However, legal punishment includes up to seven years in prison or an unlimited fine or both for possession and up to life in prison or an unlimited fine or both for dealing.
replace airbag sensors, or fix the damage around them (front end damage i would assume)
i assume you mean the king. and it is exactly the same but it can move backwards