0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why do you not use frequency modulation in long range transmission?
Frequency modulation is not used for long distance transmission because it has the problem of limited band width.
Role of modulation in signal transmission is varying why?
The Role of modulation in signal transmission varies because of what type of signal should be modulated.Then how long it should be travel in air.All these points are considered, when we go before modulation.Suppose we are transmitting vedio signal means it should be only Amplitude Modulated signal.If we transmitting audio signal means it should be Frequency Modulated Signals.So the Role of the modulation is varies in signal transmission.
Need of modulation in communication?
Need for modulation: 1. Length of the antenna for a transmitter is inversly proportional to the frequency of the signal to be transmitted. So we try shift the frequency of the singal for the transmission to higher frequencies. 2. Every transmission of signal in a bandwidth is assigned with a particular frequency which is attained by modulating the signal with the carrier frequency. Different modulation techniques are implemented according to the requirements and compatibilities
Defferential cw radar and pulsed radar?
CW Radar or Continues Wave Radar uses a constant transmission and is usually used for angle only tracking and can be combined with a second emission that is pulses or swept to deuce range using and separate antenna (or on a time schedule in some cases). The CW part of a CW Radar reference to the transition duty Ratio and because Dead and Listen time are over lapped they normally have two antennas. FM CW Radar or Frequency Modulated Continues Wave Radar, is similar to the CW set up but the Carrier Radio Frequency is swept, when processed this data can produce range data. Again the Dead and Listen time our overlapped and it is normal for separated antenna to be used. The Frequency sweep is repeated in successive management ion different angles Pulsed Radar Transmits a short pulse rather then continuously like the FMCW Radar or CW Radar and has a short Dead time and long listen time During the dead time when the transmission pulse is emitted the receiver is blanked to protect it, After the pulse has completed transmission the receiver is opened to receive the returns. This means that the receiver and transmission times are mutually exclusive and therefore the same antenna can used for both jobs. As the pulse is short the transmission peak power maybe higher then the CW Power but is present for less time. A Hybrid Radar is ICW or Interrupted Continues Wave (some times called Interrupted Carrier Wave) which is really a pulse radar with a high duty cycle.
What are the advantages and disadvantages of double sideband suppressed carrier modulation?
Amplitude modulation of a carrier results in a transmitted signal consisting of the carrier, plus an 'upper sideband' and a 'lower sideband', spaced above and below the carrier frequency by the frequency of the modulation.The bandwidth of the whole signal is double the modulation frequency. Also, the power in the carrier is constant, and power must be added in order to radiate the sidebands.All the receiver needs in order to extract the information from the signal is one complete sideband, and knowledge of the frequency and phase of the carrier. Economically speaking, the carrier is wasted power, and the other sideband is wasted power andwasted spectrum.If you can filter away one of the sidebands before transmission, then you save half of the occupied spectrum, and the receiver has everything it needs to decode the signal. If you can also filter away the carrier ... or at least knock it way down ... before transmission, you can save a lot of power and use it for the remaining sideband, which extends your range for a given amount of power. The receiver still has everything it needs, as long as it can pick up a sniff of carrier ... enough to derive the carrier frequency and phase.This mode is known as "Single Sideband Suppressed Carrier". It's exactly how the video portion of standard NTSC analog TV was transmitted, throughout all of human history until June 2009.
Why do you not use frequency modulation in long range transmission?
Frequency modulation is not used for long distance transmission because it has the problem of limited band width.
In which radar system is the transmitter turned on for short periods of time and off for long periods of time?
Pulse-modulation
Role of modulation in signal transmission is varying why?
The Role of modulation in signal transmission varies because of what type of signal should be modulated.Then how long it should be travel in air.All these points are considered, when we go before modulation.Suppose we are transmitting vedio signal means it should be only Amplitude Modulated signal.If we transmitting audio signal means it should be Frequency Modulated Signals.So the Role of the modulation is varies in signal transmission.
Need of modulation in communication?
Need for modulation: 1. Length of the antenna for a transmitter is inversly proportional to the frequency of the signal to be transmitted. So we try shift the frequency of the singal for the transmission to higher frequencies. 2. Every transmission of signal in a bandwidth is assigned with a particular frequency which is attained by modulating the signal with the carrier frequency. Different modulation techniques are implemented according to the requirements and compatibilities
Example of analog modulation in terms of long distance?
example of analog modulation
What are the advantages of digital modulation over analog modulation?
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
What are the Advantage of digital modulation over analog modulation?
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
Why modulation is necessary?
modulation is necessary for transmitting low frequency signal to long range with desired qualitative information
How long time you taken a pulse?
If you mean how long do you take a pulse for? A Mintute.
What is Modulation and what is the aim of modulation?
Modulation is any of several means of encoding an information carrying signal onto a carrier of fixed frequency. The purpose is to allow the information to be transported long distances.
How long should it take a mechanic to diagnose code p0705 and what is some results?
time? takes longer to pee then to pull code code is a fault in the transmission range sensor or connector
Why is it necessary to modulate the picture and sound signals before transmission?
To avoiding the noise signal effect.Because the modulation is a technic which providing a high characteristic to transmitting the signal on long or short distance.Because the modulated signal received as high bandwidth,high performance of received signal and the modulation Technic is provide a less hight of antenna in wireless transmission which is expressed in the term :(hight of antenna=λ/4).
