0
can be found in most household cleaning products. household ammonia is a solution of NH3 in water (i.e., Ammonium_hydroxide) used as a general purpose cleaner for many surfaces. Because ammonia results in a relatively streak-free shine, one of its most common uses is to clean glass, porcelain and stainless steel. It is also frequently used for cleaning ovens and soaking items to loosen baked-on grime. Household ammonia ranges in concentration from 5 to 10 weight percent ammonia.
What else can I help you with?
What results from copper II nitrate reacting with ammonium hydroxide?
In a standard double replacement reaction, you would have the following equation: Cu(NO3)2 + 2NH4OH -----> Cu(OH)2 + 2NH4NO3 Therefore, your products would be copper II hydroxide and ammonium nitrate.
What elements make ammonium hydroxide?
Ammonium hydroxide is NH4OH, so the elements making it up would be nitrogen (N), hydrogen (H), and oxygen (O).
Type the formula for methyl ammonium hydroxide?
I would suggest it being something like (CH3)-NH2 , more or less like NH3 (ammonia) or (CH3)-NH3OH , more or less like NH4OH (ammonium hydroxide) which I do NOT prefer
How do you make 6 N ammonium hydroxide?
To make a 6 N solution of ammonium hydroxide, you would mix the appropriate amount of concentrated ammonium hydroxide solution with water to achieve the desired concentration. The specific volumes of each component would depend on the concentration of the concentrated solution you are starting with. It is important to handle ammonium hydroxide with caution due to its caustic nature.
How prepare 6N ammonium hydroxide?
To prepare a 6N solution of ammonium hydroxide, you would first need to calculate the molarity of the concentrated ammonium hydroxide solution you have on hand. Typically, concentrated ammonium hydroxide solutions are around 28-30% NH3 by weight. To make a 6N solution, you would dilute the concentrated solution with the appropriate amount of water to achieve a final concentration of 6N. It is crucial to handle concentrated ammonium hydroxide with care as it is a corrosive substance and can cause burns upon contact with skin or eyes.
How do you prepare one liter of a 1.25M ammonium hydroxide solution?
To prepare 1 liter of a 1.25M ammonium hydroxide solution, you would need to dissolve 42.14 g of ammonium hydroxide (NH4OH) in enough water to make a total volume of 1 liter. Measure out the correct mass of ammonium hydroxide, add it to a volumetric flask, and then add water while stirring until the final volume reaches 1 liter. Make sure to wear appropriate safety gear and handle ammonium hydroxide with caution due to its caustic properties.
What happens when you blend ammonium hydroxide and potassium hydroxide?
When you blend ammonium hydroxide and potassium hydroxide, you are mixing two strong bases. The reaction could produce ammonia gas, water, and potassium salt. It is important to handle these chemicals with caution as they can be corrosive and may release harmful vapors.
How do you make buffer solution of ammonium chloride and ammonium hydroxide of pH 10?
To prepare a buffer solution of pH 10 using ammonium chloride and ammonium hydroxide, you would mix the two solutions in a specific ratio determined by their pKa values. The concentrations of ammonium chloride and ammonium hydroxide should be carefully calculated to achieve the desired pH. It is important to use a pH meter to verify the pH of the buffer solution and make adjustments if necessary.
What precipitant would form from ammonium nitrate and sodium hydroxide?
There is NO precipitant formed in the following reaction:NH4NO3 + NaOH → NH3 + H2O + NaNO3Ammonia is liberated as a gas.Remember: All sodium and ammonium salts are soluble, as even all nitrates are soluble.
Can ammonium hydroxide be removed by distillation?
Yes, ammonium hydroxide can be removed by distillation. It has a boiling point of around 37.7°C, so careful distillation at a higher temperature can help separate it from other compounds in a mixture.
What if you mix hydrochloric acid and ammonium hydroxide?
Let's see. NH4OH + HCl --> NH4Cl + H2O Theoretically, using the word loosely, you would get a salt, ammonium chloride, and water. This reaction may, or may not happen in nature as my memory of college chemistry is becoming hazy.
Name a salt which gives white precipitate on ammonium hydroxide solution and is insoluble in excess?
One such salt would be aluminum chloride since it is soluble but when reacted with ammonium hydroxide, the insoluble aluminum hydroxide forms a precipitate. Not sure what is meant by "is insoluble in excess", however.
