Probably because you got the spark plug wires plugged onto the wrong spark plugs.
changing all the cables
The jump procedure depends on the age of the Cadillac. The older cars allow the jumper cables to be connected directly to the battery. Some newer cars can be damaged if the cables are connected properly. Check the vehicles owners manual for the proper way to jump start the specific year Cadillac.
original battery and cables were side terminal
Changing transmission cables on a 2006 Pontiac vibe
It is as simple as changing the battery cables.
It did for me! Could be your cable is worn out.
red first, black last is correct. always connect positive cables first and negative or ground cables last
If twenty identical cables installed in parallel that do not evenly share the load, then you have some bad connections that are changing the resistance of one or more cables.
To change the battery in the 2003 Cadillac Seville, you will need to first access the battery that is located under the rear passenger seat. Then remove the battery cables and remove the battery.
if your battery is dead it will not give you back the key, you will have to put cables on the battery i found this out the hard way
undo battery cables from battery and hold posotive and negative together for 5 minutes or so
I have my set of speaker cables and interconnects for over 8 years now. I feel that I need to change them. I recently bought a pair of AFA speaker cables and the sound improved by a bunch. So I am thinking about changing my interconnects as well. What do you guys think?