how to change igntion lock
where is the ignition control module located on mercury marquis
On a 2000 Mercury Grand Marquis : The firing order is ( 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 ) The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Mercury Grand Marquis , 4.6 It has the Coil On Plug ( C.O.P. ) ignition system with ( 8 ) individual coils
To remove the ignition switch from a 1986 Mercury Grand Marquis, first, disconnect the negative battery cable to ensure safety. Then, remove the steering column cover by unscrewing the screws and carefully pulling it apart. Next, locate the ignition switch attached to the ignition lock cylinder; disconnect the wiring harness and remove the mounting screws. Finally, pull the ignition switch out to complete the removal process.
You can change the ignition cylinder on your 1999 Mercury Mystique by removing the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness.
Passenger side second cylinder from the front.
Begin by removing the retaining ring at the top of your 1996 Mercury Tracer ignition switch. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the cylinder. Reverse the process to install your new ignition lock cylinder.
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Mercury Grand Marquis
On a 1999 Mercury Grand Marquis , 4.6 liter V8 : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Mercury Grand Marquis
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Mercury Grand Marquis ( V8 )
On a 1995 Mercury Grand Marquis : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
On a 2004 Mercury Grand Marquis : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle