0
277 volt systems aren't normail systems
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Can a 277 unit heater be supplied with 240 volts?
Absolutely not!! 277 volts is developed from a 480 volt power supply employing 1 conductor and a neutral. 240 volt power comprises two hot conductors and NO neutral.
Is 277 volt one hot wire?
No, 277 volts is the line to neutral of a 480 volt wye three phase system. L1- N, L2 - N and L3 - N will give you 277 volts. L1 to L2. L2 to L3 and L3 to L1 will give you 480 volts.
Will 120 - 277 volt electronic fluorescent ballasts work on 208 volts?
NO! a 120-277 electronic ballast requires one "hot" wire and a neutral from either a 110V or 277V supply. If you supply it with two "hot" wires from a 208 V supply, it will instantly burn up.Yes. A ballast with a specification range of 120 volt to 277 volt will work on 208 volt. These ballast use intelligent voltage sensing technology and it does not matter if the source is a hot and neutral or two (2) hots. Don't believe it? Call a ballast manufacturer instead of giving incorrect answers.
Will you get shocked if you unsrew the hot wire on a 277 volt outlet to remove it?
ALWAYS turn off the power feed to a device and confirm there is no voltage before working on the device! 277 volts can kill you!
Can you run 220 volt appliances off a 380 volt supply?
you could use a step down transformer if you had no other option. but the best thing to do is run a 220 feed directly from the fuse panel Step down transformers get very hot and do not last forever
How can you get 277V from residential service?
1You could get 220-240V from using the two live ["hot"] wires rather than one live and one neutral. 2Tim, Industrial control transformers are available to get 120 volts from 277 volt systems. If you feed one of these with 120 volts to the secondary coil, it will put out 277 volt from the primary. However, these are rare and are not cheap. If you are trying to use surplus 277 volt fluorescent lights on a 120 volt system, it would be cheaper to replace the ballasts in the fixtures. Another approach would be to use an autotransformer with a 240 volt primary and a 32 volt secondary. If you feed it with 240 volt and wire it to boost +32 volts that will give you 272 volt which should run the lights. But again, you are looking at $60 - $100 for one circuit of lights. 3If you have access to three phase power..... Phase to ground on a 480v 3 phase system is 277v.
What is 277 volts?
277 volts is the Hot to Neutral voltage in a 277/480 volt 3-phase "Y" electrical system. This is a commercial and industrial application voltage. The purpose of using higher voltages in these applications is to supply higher power levels [watts or kVA] than at lower voltages for the same size of conductor. <><><> A 277 volt service is used for industrial lighting. <><><> A 480 volt 3-phase power service is common in factories in USA and other countries which use 60 Hz ac electrical services. If you use the 480 volt service lines in the 'star' or 'Y' configuration you will have a central neutral point to connect a neutral line. You can then get a 277 volt single phase service by using one of the three phase lines along with that neutral
Can you get 120 volts from a 480 volts 3 phase Y generator?
NO, the 480 Volts Y -- is 4 wire system, with three wires which are hot legs @ 480 volts between each three hot legs. A mid tap is a neutral leg (ground) the white wire. Which gives 277 volts between it and any of the three hot legs. so a 4wire 480 volt Y system. Gives 480 /277 volts.
Are 277V lights wired the same as 120V?
The connection diagram is the same, one hot-leg and one neutral. But if you do not have 277 volts as your source voltage, connecting a 277 volt light (usually a ballast) to 120 volt will not work. Conversely, if you hook up a 120 volt light or appliance to 277 volts, it will quickly become toast.
When was Situation Hot created?
Situation Hot was created in 1990.
Will a 12 volt bulb get hot?
Yes. Many 12 volt bulbs get very dangerously hot, for instance the 12 volt bulbs that are commonly used in vehicle headlights and in small 12 volt 50 watt overhead ceiling lights in homes.
How many total hot termanals are there on a normal outlet plug?
Answer for USA, Canada and countries running a 60 Hertz supply service.Need to know the voltage of the outlet plug. On a 120 volts outlet there is one hot terminal and on a 240 volt outlet there are two hot terminals.
