When placed next to any angle on a triangle, the theta symbol (θ) represents that missing angle.
Calculate the percentage that a particular sector represents of the total value. Then the angle size is 3.6 times the percentage.
obtuse angle
That's a reflex angle. 0 to <90 Acute angle 90 Right angle >90 to <180 Obtuse angle 180 Straight angle >180 to <360 Reflex angle 360 called Full circle
First, if the angle is 360° or more, find the remainder of the angle divided by 360 - this is as 360° represents a full turn. If you have a 360° protractor just measure off the angle. If you only have a 180° protractor, then there are two ways it can be done as the protractor is marked so that 0° - 180° can be measured from either end of the base line: Method 1: excess over 180° 1) Subtract 180° from the angle to get the excess over 180°. 2) Place the protractor on the line, centred on the vertex of the angle on the left of the line, with the top 0°/180° mark on the line. 3) Measure the excess over 180° calculated in step 1 from the bottom 0° mark of the protractor. 4) Draw in the second angle arm - the reflex angle (measured clockwise) is as required. Method 2: acute/obtuse angle of the reflex angle to complete a full turn 1) Subtract the angle from 360° to get the angle which completes the full turn 2)Place the protractor on the line, centred on the angle vertex on the left of the line, with the top 0°/180° mark on the line. 3) Measure the angle to complete the full turn calculated in step 1 from the top 0° mark of the protractor (on the line). 4) Draw in the second angle arm - the reflex angle (measured clockwise) is as required. The above assume a clockwise angle is being drawn from a vertical line with the angle vertex at the bottom. For anticlockwise angles, place the protractor on the right of the line. For a non-vertical line [mentally] rotate the paper so that the first arm of the angle is vertical with the angle vertex at the bottom.
Starting Strength
x and y are complementary so x + y = 90 and so y = 90 - x z and q are complementary so z + q = 90 and so q = 90 - z x = z so 90 - x = 90 - z that is y = q
itincreasesthe Qangle it increases the rangeof movement and it elevates the pateela so as not to irritate the retropatelar cartilage
Angle q will be less than 90 degrees because a right angle is 90 degrees and the 3 angles in a triangle add up to 180 degrees.
I believe it is because Q represents quantity
tan x
Q represents the set of all rational numbers, Zrepresents the set of all integers so Q excluding Z, represents all rationals that are not integers.
Sum of all three angles is 180 degrees. p = 36 so q+r = 180-36 = 144 degrees. Now, q = 5r so 144 = q+r = 5r+r = 6r so r = 144/6 = 24 and then q = 5r = 5*24=120 Answer: q = 120 deg, r = 24 deg
A+
The increased q angle typically found in females increases the risk of patellofemoral pain syndrome.
Q. What is angle of repose for lime stone?
Which shape represents a 119˚ angle?