Want this question answered?
ICMP protocol.
rtd .3 sender digram
sender receiver message transmission media protocol
you have a wiring short somewhere. try running a new cable from the sender to the gauge
No
Different from a connectionless protocol, a connection-oriented protocol guaranties the delivery of the information. An example of connection-oriented protocol is (TCP) and a connectionless protocol is (UDP). page/926 A+
To best answer this question consider why we needed sequence numbers in the first place. We saw that the sender needs sequence numbers so that the receiver can tell if a data packet is a duplicate of an already received data packet. In the case of ACKs, the sender does not need this info (i.e. a sequence number on an ACK) to tell detect a duplicate ACK. A duplicate ACK is obvious to the rdt3.0 receiver, since when it has received the original ACK it transitioned to the next state. The duplicate ACK is not the ACK that the sender needs and hence is ignored by the rdt3.0 sender.
ARP used for resolving mac address from ip address, say one client want to communicate with another and the sender knows only its destination IP address. For communication it requires the physical address of the destination, thus sender uses ARP protocol to resolve the physical address of the destination from ip address by sending arprequest to destination system.
The sender is ALWAYS responsible for the communication. Furthermore the sender is responsible for getting feedback describing the communication, not just did the receiver hear it, to be sure the communication was received. Why is this? The receiver does not know what it is the sender is trying to communicate or if it was communicated accurately. Only the sender can possible know unless the receiver is a mind reader...
communication warks on the information gap principle. transmission of information is possible only if there is a gap between the information which the sender intends to transmit on any given topic, and the information that the receiver already possesses on that topic.
communication warks on the information gap principle. transmission of information is possible only if there is a gap between the information which the sender intends to transmit on any given topic, and the information that the receiver already possesses on that topic.
tachometer quit working - all else on the fuse works. where is the tach sender? Is it possible to check the tach and sender without removing the instrument cluster? where do I find the wiring diagram for the tach and sender? auto: MB300TE, 1991 GASOLINE