Frequency modulation Phase modulation
Analog Pulse modulation is discreet in time but the formation is transmitted in continuous form. In digital pulse modulation, not only the time axis is discreet but the information is also in digital form. Examples of Analog PM are PAM and PTM i.e pulse amplitude and pulse time modulations respectively. Examples of Digital PM are PCM and PDM i.e pulse code and pulse delta modulations respectively.
Actually phase modulation was used for the color signal in all analog TV systems.Phase modulation, with some signal preprocessing, was used to indirectly get frequency modulation in many FM transmitters.Certain modems use phase amplitude modulation.etc.
In a analog transmitter the RF carrier have to be modulated with the analog signal either by AM or FM where in digital transmitter the carrier is simply switched on and off a off = a zero and on = a one
Amperes Hertz Watts
Frequency Amplitude Phase from Anura Priyantha
Frequency modulation and Phase modulation
The most fundamental difference, I would say, is that Amplitude Modulation (AM) is a kind of Analog Modulation Technique (the modulation is applied continuously in response to the analog information signal) where Amplitude Shift Keying is a type of Digital Modulation Technique ( an analog carrier signal is modulated by a discrete signal, digital modulation methods can be considered as digital-to-analog conversion, and the corresponding demodulation or detection as analog-to-digital conversion. The changes in the carrier signal are chosen from a finite number of M alternative symbols).
No. The Internet is digital, not analog.
example of analog modulation
Analog modulationIn analog modulation, the modulation is applied continuously in response to the analog information signal.Common analog modulation techniques are:Amplitude modulation (AM) (here the amplitude of the modulated signal is varied) Double-sideband modulation (DSB) Double-sideband modulation with unsuppressed carrier (DSB-WC) (used on the AM radio broadcasting band)Double-sideband suppressed-carrier transmission (DSB-SC)Double-sideband reduced carrier transmission (DSB-RC)Single-sideband modulation (SSB, or SSB-AM), SSB with carrier (SSB-WC)SSB suppressed carrier modulation (SSB-SC)Vestigial sideband modulation (VSB, or VSB-AM)Quadrature amplitude modulation (QAM)Angle modulation Frequency modulation (FM) (here the frequency of the modulated signal is varied)Phase modulation (PM) (here the phase shift of the modulated signal is varied)
Analog Modulation
The basic difference is that in analog modulation the modulating signal is analog signal and in digital modulation it is in digital form.
In Pulse Amplitude Modulation, amplitude of pulse varies with signal. Theoretically in analog modulation there infinite levels of amplitudes or continuous amplitude. Two level PAM is digital modulation where only 2 number of levels are there. Thus signal is quantized to two discrete levels.
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
Amplitude Modulation or analog is like a wave, digital is a series of 1s and 0s. Different animals unless you want to add complexity by including a converter between analog and digital
Pulse code modulation (PCM) is a method used to digitally represent analog signals by sampling the signal at regular intervals and quantizing the amplitude value to a specific number of bits. This allows for the accurate reproduction of the original analog signal for transmission and storage.