The physical and logical structure of computers is normally described i n reference manuals provided with the system.
what is instruction length and what is instruction format and what is program length and what is the difference among them
store word = sw in MIPS We use it in the following format sw regs, addr It stores the word in register regs to address addr.
the number of bits required to represent an instruction of a cpu is known as length of the instruction or known as instruction.
Change the Doc format to . any other format like rich txt format or .TXT format
The 8085 is an 8 bit processor, so its word length is 8 bits.
An instruction is a command to the microprocessor to perform a given task on specified data. Each instruction has two parts: One is task to be performed,called the operation code (opcode). Second is the data to be operated on, called the operand. It can be specified in various ways,it may include 8bit/16bit data, an internal register, a memory location , or 8bit/16bit address. In some instructions, the operand is implicit. The 8085 instruction set is classified into three groups according to Word size. They are- 1. One word / 1 byte instructions 2. Ttwo word / 2byte instructions 3. Three word / 3byte instructions
diagram
The 8085 instruction set is classified into three groups according to its Word size. They are 1. One word /1 byte instructions 2. Two word / 2 byte instructions 3. Three word / 3 byte instructions
addressing mode is used to form an instruction format.
The 8085 instruction set is classified into the following three groups according to word size: 1. One-word or 1-byte instructions 2. Two-word or 2-byte instructions 3. Three-word or 3-byte instructions
Instruction is a noun.