0
What else can I help you with?
How do you remove tensioner assembly 92 ls400?
How to remove auto tension 92 ls400
Step by step instructions for the removal and installation for a Lexus ls400 instrument cluster?
go to mrwhizzard.com. print removal instructions.
How do you change a 1990 Lexus ls400 fan switch?
To change the fan switch on a 1990 Lexus LS400, first disconnect the negative battery terminal to ensure safety. Locate the fan switch, which is typically found near the radiator or on the engine block, and remove any necessary components obstructing access. Unplug the electrical connector from the old switch, unscrew it, and replace it with the new switch. Reconnect the electrical connector, reassemble any removed parts, and reconnect the battery.
How do you replace plugs on 1992 LS400?
you have to remove the distributor covers.
How do you replace headlamps on a 1992 Lexus ls400?
Go to the library and look up the automobile and you will find the instructions in the book or ask for instructions on computer
Spark plug wiring diagram on 1990 Lexus ls400?
Go to http://www.lexls.com/tutorials/ignition/sparkplugs.html
Where is the oil sending pressure switch located for a Lexus LS400 1990?
behind the oil filter
What is the spark plug firing order for a 93 ls400 and where can you find a diagram for it?
http://www.lexls.com/tutorials/ignition/sparkplugs.html Good luck!
Where is the fuel cutoff switch on a 1992 Lexus Ls400?
The car was hit in the rear and now it won't start. I was thinking that it has a fuel cutoff switch but I do not have the owners manual.
Where is the ecm on Lexus 93 ls400?
if you remove the passenger glove box then you will find it hiding away in there.
How do you change the brake pads on a 1994 Lexus LS400?
Remove the wheels and remove the 2 14mm headedbolts from the caliper and lift caliper from brake pads www.lextechautomotivellc.com
Why Lexus LS400 brake lights don't work Is not the brake switch Any suggestions?
earth leak or fuse if you are certain the sender switch at top of brake pedal is ok.Put tester on circuit to establish feed or no feed
