0
What else can I help you with?
How do you remove a tension pulley for a 92 Grand Marquis?
I don't know about a 92, but my 90 GM GS has no tensioner. Instead the alternator functions as the tensioner. Loosen the top bolt and slide it to the left.
How do you change the belt tensioner on a 92 Camaro V6?
remove belt then remove two bolts holding it on and remove old put new one on
How much would it cost to rebuild air conditioner for Lexus 1990 ls400?
Look forward to a bill of over $2000! I had my 92 Lexus LS400 converted for $2,456! :(
How do you adjust the Belt tensioner on a 92 Chevy 1500?
You can adjust the belt tensioner by loosening the tensioner bolt. When the tensioner bolt is loose the tensioner pulley can move back and fourth.
How do you change the alternator on a 92 Geo Metro?
Where is the tensioner
How do you change a belt on a 1992 Saturn?
The best way to change the belt on a '92 Saturn is to remove the front passenger wheel and then remove the plastic wheel well to gain access to the belt tensioner. Use a long ratchet to hold the tensioner while you remove the belt from one of the pulleys. Then you should be able to pull the belt all the way out.
How do you remove rotor from 92 Geo Metro?
to remove brake rotors you will need to remove the hub assembly. you will need a slide hammer. unless you have this tool and lots of patience i would recommend letting a mechanic work on it.
Where is the fuse box in a 92 Lexus ls400?
left side panel on drivers side. Where you put your feet. pull the carpet back and there it is
How do you tighten all belts on 92 Nissan pathfinder?
The Alternator and Power Steering Units have a tensioner bolt on each. The final tensioner bolt is just above the tensioner pulley in the top center.
Will a 92 Lexus ls400 instrument cluster fit a 93 Lexus ls400?
Yes, a 1992 Lexus LS400 instrument cluster can fit a 1993 Lexus LS400. Both models share similar design and electrical connections, making them compatible. However, it's always advisable to check for any specific differences in wiring or features, such as the presence of additional gauges or indicators, to ensure proper functionality.
How can you remove a rear hub assembly on a '92 Lesabre when torques are used and hand tools will not do?
You can remove it no problem with the usuall tools. You only need a torque wrench to put it back together again.
How do you release tensioner on a 92 camaro?
You put the end of a 3/8 socket wrench on it (with no socket).
