You put the end of a 3/8 socket wrench on it (with no socket).
remove belt then remove two bolts holding it on and remove old put new one on
There was no SS camaro in 1992.
rotate the tensioner clockwise to release the tension and remove the belt then slowly release the tensioner. route new belt over the various pulleys according to the diagram under the hood again rotating the tensioner as to allow belt to fit in place and then slowly release the tensioner again.
Only 82-92 camaro hood.
rotate the tensioner clockwisse to release belt tension. remove belt from the auxilarary components and slowly release tensioner. route the new belt over the various pulleys, again rotating tensioner to allow belt to be installed then release tensioner. These models have a drivebelt routing decal on radiator shroud to help during installation.
One bolt holds the tensioner to the engine, take it off to get the tensioner off and then you can get to the bolt that holds the pulley to the tensioner.
Location of pass key controller module on 92 Camaro
You can adjust the belt tensioner by loosening the tensioner bolt. When the tensioner bolt is loose the tensioner pulley can move back and fourth.
How to remove auto tension 92 ls400
my vent doors are not working in my 92 camaro. the heat will blow hot or cold but only on def
Where is the tensioner
yes it will camaro parts from 82-92 will interchange