0
No. 0.83 Amperes = 830 milliamperes. 1A = 1000mA, it's a base-ten system, just like meters or liters.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What does 500mA equal to?
500mA = 500 miliamper 1000mA = 1 amp so 500mA = .5 amps
Is 5.0mA the same as half an amp?
"mA" represents "milliamp" so 5.0 mA would be 0.005 Amps, which is not half an amp (0.5 A) Milli means one thousandth so 500mA would be half an amp.
Can you use a 12VCD 500mA instead of a7.5V 800mA AC power adapter?
Yes you can. But it may damage your computers power supply.
How many watts per hour will a unit that is rated at DC 12V 500mA consume?
Power = volts x amps, so your example will be 12 x 0.5 = 6 watts. (500mA = 0.5 amp) Note we don't talk of 'watts per hour', it is just watts. 1 watt = 1 joule per second
There is a total of 500mA of current into five parallel resisters the currents through four of the resistors are 50mA 150mA25mA and 25mAand 100mA what is the current through the fifth resister?
150 mA is.
What does 500mA equal to?
500mA = 500 miliamper 1000mA = 1 amp so 500mA = .5 amps
What is the power when there are 500mA of current through a 4.7k Ω resistor?
p=i square x r = 500ma * 500ma = .25 * 4.7k = 1175 watts
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Can you charge a 500mA battery with a 1300mA charger?
Yes, you can charge a 500mA battery with a 1300mA charger.
Can you use a 9v dc 200mA ac adaptor in place of a 500mA?
Yes. The current rating should be the same or greater than the original. This means the adapter can supply up to 500mA; In your case it only needs to supply 200mA, so it is more than up to the job.
Can you use 12v 600ma instead of 12v 500ma?
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.
Is it safe to use a 1500ma instead of 500ma battery?
As long as the batteries are putting out the exact same voltage, then yes you can use a battery with a higher ma rating.
Diffirence between 7.2V-500mA and 7.2V-1500mA?
If you're talking about batteries, the 1500ma one has 3x longer running time, and can be used, if it fits and the connections are the same.
Is it ok to use a 4.5v 800mA AC adapter for a device when the original adapter is supposed to be 4.5V 500mA - will it damage the device?
Yes. As long as the voltage is the same which it is. The 800mA is the capacity that the transformer can produce safely without going into an overload state. Your original adapter was rated at 500mA which means that what ever device was plugged into it draws less that 500mA. You might notice that the new adapter is slightly physically larger. So you are safe to use the new adapter with the higher rating.
It takes about 2 hours to charge and will charge from any USB port or USB charger that delivers 500ma or more.?
It takes about 2 hours to charge and will charge from any USB port or USB charger that delivers 500ma or more.
5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?
5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?
What is the output dc voltage for a nokia mobile charger?
7.5v 500mA Dc charger
