150 mA is.
175mA
In parallel circuit the current through the resistors are different in values depending upon the values of resistors. But the sum of the currents across all the resistors will be equal to the current through the sourcgsvg bdjasuhafyuhda
The current in the circuit will depend on how the three resistors are wired. Series? Parallel? Series parallel? With the resistors in series, 3, 2 and 4 ohms will add to 9 ohms. As I = E/R, I = 9 V / 9 ohms = 1 A. With the resistors in parallel, the 3, 2 and 4 ohm resistors will draw 3 A, 4.5 A and 2.25 A respectively, and the total current will be the sum of the branch currents, or 3 A + 4.5 A + 2.25 A = 9.75 A. There are 3 different series parallel circuits possible, and more investigation will be necessary to solve for them.
parallel combination of resistors are used in house circuits
5 ohms
no
In parallel circuit the current through the resistors are different in values depending upon the values of resistors. But the sum of the currents across all the resistors will be equal to the current through the sourcgsvg bdjasuhafyuhda
It represents that two resistors are connected in parallel.
The current in the circuit will depend on how the three resistors are wired. Series? Parallel? Series parallel? With the resistors in series, 3, 2 and 4 ohms will add to 9 ohms. As I = E/R, I = 9 V / 9 ohms = 1 A. With the resistors in parallel, the 3, 2 and 4 ohm resistors will draw 3 A, 4.5 A and 2.25 A respectively, and the total current will be the sum of the branch currents, or 3 A + 4.5 A + 2.25 A = 9.75 A. There are 3 different series parallel circuits possible, and more investigation will be necessary to solve for them.
Measure the voltage appearing across each resistor. If they are identical, and equal to the supply voltage, then the resistors are in parallel.
The resistors should be connected in parallel .
parallel combination of resistors are used in house circuits
RParallel = 1 / Summationi=1toN (1 / Ri)
A: The relationship is that the current will divide for each paths in a parallel circuit and the voltage drop across each will be the source voltage. In a series circuit the current will remain the same for each component but the voltage will divide to reflect each different component value. And the sum of all of the voltage drops will add to the voltage source.
5 ohms
Both resistors will have the voltage of the battery.
Parallel resistors act like a resistor smaller than the smallest parallel resistor. Calculate as 1/(1/R1+1/R2+1/R3...)
If you need a resistor of a certain value, and you have no resistors with small enough values,you can create the one you need by connecting several of those you have in parallel.The effective net resistance of resistors in parallel is always less than the smallest individual.And the more resistors you add in parallel, the smaller the net effective resistance becomes.