No.
6 amps.
A three wire home distribution service rated at 100 amps has a wattage capacity of;From L1 to L2 at 240 volts x 100 amps = 24000 watts or 24 kilowatts. From L1 to neutral at 120 volts x 100 amps = 12000 watts or 12 kilowatts. From L2 to neutral at 120 volts x 100 amps = 12000 watts or 12 kilowatts.
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
To convert watts to amps, you can use the formula: Amps = Watts / Volts. In this case, to convert 200 watts at 12 volts to amps, it would be: 200 watts / 12 volts = 16.67 amps. So, 200 watts at 12 volts is approximately 16.67 amps.
You need the volts times the amps to equal 100 Watts. On 12 v that is 8.33 amps, or on 200 v is it 0.5 amps.
Watts is volts times amps, so 12 x 30 = 360 watts
160 amps at 12v.
160 amps at 12v.
If the 12V source can deliver 100 Ampere, then yes. If it can't, then no. (remember watts / volts = amps)
This will still only produce 12 volts. It will produce 1200 watts. watts is the result of Volts times Amps.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.