0
It is know as a flip flop. Singular. Don't be so silly billy :P
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How can a flip flop be used in frequency division?
The flip-flop can be configured to change state on each clock pulse. This causes the output of the flip-flop to be one half of the input frequency - hence the term "frequency division". You can also configure more than one flip-flop into other divider scenarios, such as divide by 3, 5, 10, etc. You can also use the output as the input to a phase-locked-loop, resulting in frequency multiplication.
Why does a d-type flip flop need a transition gate on its clock input?
The D Flip-Flop takes the logic level of 'Data' to the output only on the rising edge of the clock pulse.Without the transition gate: Since the clock pulse is a square wave (and is high for half a cycle, and low for the other half), the logic level at 'Data' could change while the clock pulse is high, causing the output to change before the next rising edge. This is not how a flip-flop operates.The transition gate prevents this by converting the clock pulse into a very short 'blip' of a few nanoseconds, starting at the rising edge of the clock pulse, repeating on the next cycle. This means there is only a very small window where the clock is high, and the logic level at 'Data' can be taken to the output.
How many bits are in a half dollar?
Two half-dollars otherwise known as a fifty cent piece make a dollar.
In a magnetic material hysteresis loss can't be reduce to zero Why?
In normal ferromagnetic material, the magnetic domains within the material are randomly oriented. When an external magnetic field is applied, it causes the magnetic domains to align more or less in the same direction. During the second half of the AC cycle, when flux is flowing the opposite direction, extra energy is required to flip those domains all the way around to face the other direction. And then, in the first half of the next AC cycle, they have to flip all the way around again. That extra energy is the hysteresis loss.
What do you mean by 3 dB cutoff frequency?
3db frequency is the frequency at which the value in the graph is reduced by 3db level It's also known as the half-power point.
How can a flip flop be used in frequency division?
The flip-flop can be configured to change state on each clock pulse. This causes the output of the flip-flop to be one half of the input frequency - hence the term "frequency division". You can also configure more than one flip-flop into other divider scenarios, such as divide by 3, 5, 10, etc. You can also use the output as the input to a phase-locked-loop, resulting in frequency multiplication.
What size flip flop do you buy if you wear a half size?
sy if you wear a size 7 1/2 you would buy an eight
If your 14 and have 2 and a half inch heels where do you wear them?
You can wear them with whatever goes good with them. I also have a pair of really think flip flops and i just wear them when I feel like it. Maybe with a skirt or something...
Why does a d-type flip flop need a transition gate on its clock input?
The D Flip-Flop takes the logic level of 'Data' to the output only on the rising edge of the clock pulse.Without the transition gate: Since the clock pulse is a square wave (and is high for half a cycle, and low for the other half), the logic level at 'Data' could change while the clock pulse is high, causing the output to change before the next rising edge. This is not how a flip-flop operates.The transition gate prevents this by converting the clock pulse into a very short 'blip' of a few nanoseconds, starting at the rising edge of the clock pulse, repeating on the next cycle. This means there is only a very small window where the clock is high, and the logic level at 'Data' can be taken to the output.
What is the number of flip flops needed to make a divide by 32 device?
6 t flip flops are needed ( to connected as in asynchronous counter), 1st t ff o/p freq will be same as i/p clk, 2nd t ff o/p freq will be half of i/p freq, and 3rd ones o/p freq is i/p freq divided by 4...... so the o/p freq of 6th ff will be i/p freq divided by 32.
What is a PasswordSettingsObject within an Active Directory also known as?
well, if you flip it 4 times then the probability of getting heads is a half, so two.
What does Percy Jackson look like?
black hair, sea green eyes light tan orange camp half blood shirt and a bronze sword, called Riptide. brown flip flops and dark wash jeans As of book three he has a streak of gray in his hair.
What is a braini on trampolines?
a braini is a front flip with a half twist
How do you hospital flip?
you do a half kickflip and then you turn the board over
If you flip a penny 10000 times will it land half the time on tails and half the time on heads?
Assuming the penny is unflawed, yes it should. The more times you flip it, the closer the split should be to 50/50.
Flip 3 coins?
The probability you'd get heads is still one half.
What is half of globe known as?
Half of the globe is known as a hemisphere.
