enthalpy LDPE
HDPE is a plastic that is lower density than polyethylene, yet has a high tensile strength. So, combined with fiberglass it is good for boat building. Boats are not built just out of fiberglass, but of fiberglass and a plastic resin. Below is a link that explains HDPE better, and it's most popular uses.Source(s):http://en.wikipedia.org/wiki/HDPE
Yes, it will. It'll be slow, but it'll happen. In the meantime, your sulphuric will be contaminating with the metal salts as well. Go for HDPE or glass.
LDPE is softer, more flexible and melts at lower temperatures than HDPE. LDPE is used for things like sandwich bags. HDPE is harder, has a higher chemical resistance and can withstand higher temperatures. (120 Degrees Celsius for short periods and 110 Degrees Celsius continuously) It is used for things like Plastic bins.
Generally detergent bottle are made of high density polyethylene (HDPE) and polyethylene terephthalate (PET) depending on the detergent type if it is washing liquid or soap then PET is preferable due to its transparency properties. HDPE is more preferable for other type of detergents such as bleach, shampoo etc. and these products are highly chemical which requires a good chemical resistance. Therefore, HDPE has better properties for detergent container purposes; excellent flexural strength, good impact strength, very good chemical resistance, good fatigue resistance and service temperature to 126 °C. HDPE detergent bottles can be manufactured by extrusion blow moulding as it is suitable for mass production and cheaper than other techniques.
HDPE= High-density polyethylene
Sometimes
High Density Polyethylene (HDPE)
LDPE is softest, HDPE is harder, PMMA is much harder than HDPE
HDpe not soluble in any solvent at room temprture
PMMA LDPE HDPE
what is the difference between the PE pipe and HDPE pipe.
64
HDPE has higher density therefore it has greater tensile strength
High-density polyethylene (HDPE) is one of the most commonly used plastics in the United States
enthalpy LDPE
What the letters HDPE suggest you are asking about is an industrially produced form of plastic. The manufacturer of the plastic would the best source of 'how it is made'