answersLogoWhite

0

One and the same. The GM name for that trans is turbohydramatic.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Is there a turbo kit for non turbo 1991 300zx?

Yeah it's called buying a 300zx twin turbo engine (vg30dett). Much better than making a non turbo into a turbo. The vg30dett costs around $2000 and comes with the transmission which you will need. This is better than putting turbos on your n/a z because the vg30dett comes stock with forged internals which allow you to use a lot of boost. For $3000 you can have the engine,turbos,and tranny bought and installed. For another $1000 or so you can have near 400hp.


What is a turbo transmission?

A turbo transmission is does not involve turbo in the conventional sense at all. A turbo takes exhaust gases straight off the cylinder head via a special exhaust manifold, and uses that air velocity to force air into the intake. This has a cost of having the incoming air to the engine hotter than what is ideal, but there is a trade off with any system. A turbo transmission, such as GM's turbo hydramatic, is merely a name GM assigned to the transmission. GM's Turbo Hydramatic 700R4 transmission was their first with an overdrive gear. This overdrive gear was a higher gear ration than previous transmission's 3rd gear and gave much better gas mileage on the street. So, a turbo transmission does not actually use turbo, it is just a name for a transmission with another gear for highway use. Turbo in this sense is just a name.


How longer is a turbo 400 than a turbo 350 transmission?

The Turbo 400 (TH400) transmission is generally about 2 inches longer than the Turbo 350 (TH350) transmission. This difference in length can affect fitment in some vehicles, especially in tight spaces. Additionally, the TH400 is a heavier-duty transmission, which is another factor to consider when comparing the two.


Is stock 350z faster than turbo Subaru?

Nopoe


Which torque converter is best for a turbo 400 hydramatic transmission?

that all depends on what engine you have and the cam in your engine and your rearend gear and what you want to do with the car, once you figure that out you will have a better idea what stahl converter you need, other than that I would just put the stock converter in it.


Need reconditioned engine for mr2 are they costly?

5SFE(no-turbo MkII) are dirt cheap. You can get a decent one with transmission and ECU for less than $2000. Gen2 3SGTE (MkII USDM turbo) are a little more than $2K. Gen3 3SGTE (MkII JDM turbo 95-99) be ready to pay through the nose for one of these. They are hard to come by and very expensive (Roughly $4K). The advantage is a better intake and exhaust set up. Stock Hp is about 245. If you are into modding your cars this engine is the one for you.


Could you put a turbo on Nissan 300zx stock engine no stock turbo?

Yes you can, however it is only a minimal difference in performance and is very costly! I used to own a non turbo 1984 2+2, and it was a less than 10% add'l horsepower.


Is Lamborghini gallardo twin turbo is faster than edo competition Lamborghini gallardo lp600?

well lamborghini doesnt make a twin turbo gallardo but the regular stock model goes 200mph,0-60 in 3.7 seconds so its a better deal at 220k than the 300 to 500 edo


Is a turbo controller better than a mod controller?

modded controller


Is the turbo engine better than the natural one?

When it comes to performance, yes.


Which is better for transmission alternating current and direct current?

Alternating current is better than direct current for transmission.


Is a stock Toyota supra faster than a stock Mazda rx7?

I have an 87 7mge non turbo and i beat my buddies 89 rx7 with a 13b and webber side drafts