No it is not
the bell housing bolt pattern is the same but the flywheel on 460 is thicker and makes they pressure plate hit bellhousing from 351m/400 there for it will not work you have to have a bellhousing from a 429 or 460
Yes it does, as well as the 370, 400, and 460.
no 351 windsor engine is small block. 460 is a big block
No. the bolt pattern is different.
Depends.if the bell ( where it covers the flywheel behind the motor) is a bog block.or small block bell housing. Like a small bell housing will bolt to a 302 and big bell.housing will bolt to.a 460
NO-the bell housing of a 390 has the bolt pattern from the FE family of motors,352,360,390,406,427,and 428. The 400 (m) is the same as a 351(m),429, and 460 bolt pattern, They are two completely different patterns.
if you change the bell housing
Yes, it can be seen looking from the slave cyl/bell housing area
The oil pressure sending unit is on the back of the block just above the bell housing. The unit screws in.
No a 351/400 is the same as the 429/460 Big block style, the 351W is the small block motor style like the 289, 302, 351C, 300 I-6. If the bell housing unbolts from the housing find the small bolt patter to match the tranny.
yes if its a e40d
460 * 75% is the same as 460 * 0.75, which equals 345.