0
No. The amount and cost of the equipment to reach 480 volts will be higher than any payback you may receive from being off grid. Multiply this cost by three times for a three phase system. This is the reason any off grid operations use electrical generator sets. Even with the price of diesel fuel added to the operating costs it is cheaper that going solar.
What else can I help you with?
What is the minimum volt rating of wire used in a 3 phase 4160 volt phase to phase system?
5000 volt
Can you connect a 460volt 3 phase motor to a 480 volt 3 phase system?
The systems are one in the same. Yes.
You are measuring 480 volt from phase to phase and 280 volt phase to ground but one leg measures 440 volt phase to ground why?
Check for a blown fuse in one of the phase legs.
Can you run a double phase motor on home 220 volt system?
If you mean a dual voltage motor 120/240 then yes these will operate on a 240 volt home distribution system.
In a three phase four wire wye system having 277V for lighting the three phase motors operate on what voltage?
480 Volt
Why do you rate a dc machine in watt but a transformer in kilo volt-ampere?
The difference between watts and volt-amperes is due to the relative phase angle, or power factor, between voltage and current. In a DC system, the two are in phase. In an AC system, with only resistance, the two are also in phase. Add capacitance or inductance and the phase angle changes.
How do you get a 220 volt single phase from 380 volt 3phase synchrounos generator?
220 volt single phase from 480 volt 3 phase that one wire taken one phase and second wire connected in earth point. we get 220 v The above answer is incorrect, one phase from a three phase 480 volt system will give you 277 volts to ground. You must use a transformer to get the voltage you need.
What is voltage phase to phase 380 3 phase?
Voltage phase to phase in a 380V 3-phase system refers to the voltage measured between any two of the three live conductors in the system. In a balanced 3-phase system, the phase to phase voltage is equal to the line voltage, which is 380V in this case. This voltage is commonly used in industrial and commercial applications to power heavy machinery and equipment. It is important to note that the phase to phase voltage is higher than the phase to neutral voltage in a 3-phase system.
Can you wire up a 240 volt single phase water heater to 277 volt single phase?
no
How do you obtain a 230 volts single phase supply from a 400 volts three phase four wire supply?
400 volt three phase on a grounded system is 230 volt single phase, with each phase 120 degrees apart. So, if you have a 400 volt, three phase four wire service (grounded service), you can pull one phase off and reference to the neutral for 230 volt service. Note this may not allow 115 volt service, unless there is also a center tap for each phase.
Does a 208 volt outlet need a neutral?
No a 208 volt outlet does not need a neutral. 208 volts is the line voltage between any two legs of a three phase 208 volt system.
What is the benefits of using 277 volt electrical equipment?
with 3 phase lighting you do not have to use as large of wire and can use one neutral for every 3 current carrying conductors so it cut down on material costs ( as voltage increases current decreases) <<>> The voltage 277 is the star-point voltage of a 480 volt three phase system. By using a 480 volt wye system you have the dual ability of running 480 volt three phase equipment along with 277 volt lighting. The side advantage is the ability of using the phase voltage to ground (neutral) 480 / 1.73 = 277 volts for general lighting of the building the 480 volt equipment is located in.
