In a T* ballast and T8 bulb more energy efficient then a T12 ballast and a T8 bulb? A:Depends on the CURRENT through the tube. When the Tube is run at 100% of rating, The T12 Takes more CURRENT to give a certain Brightness. Because the surface of the T8 is closer to the ion stream through the tube, it takes less CURRENT to light up the T8 to the same brightness. However, IF you use a T12 in a T8 ballast, you will get LESS CURRENT through the tube, and LESS POWER consumed ALONG with LESS Light.
Yes and no. It can run without a starter, but it can't start. The starter stores energy and releases it all at once, causing a higher voltage. The gas in the tube has a higher resistance when not lit, so it takes more voltage to start it glowing. Once it is glowing, the resistance is lower, so it can run without a starter.
choke (ballast),starter,tube light,tuble light socket holder and the tubelight mounting plate
No. A mercury vapor lamp will work on a metal halide ballast, but not the other way around.
Ballast connection diagrams are on the identification label that is on the ballast.
yes..if we replace magnetic ballast with electronic ballast...there is no need of starter if we use electronic ballast.
ballast are either electronic or iron core induction type so at the end of the day it does not matter what type it is so long as it can handle the wattage of the tube you are trying to drive any thing will work so long as you have every thing in place that the new ballast needs,electronic types need nothing to work ballast types need a starter of some kind
NO, they are not.
Yes the ballast and starter are the same you can run halide in hps, but not hps in halide.
No.
Yes.
just had the same thing turns out the automatic car starter went bad and fried the starter replaced it same thing the ignition switch also went bad replaced that too all set now
Starter of toyota corolla and matrix is not the same. The best thing you do if you change your starter by yourself is to remove and compare to the new starter.
In a T* ballast and T8 bulb more energy efficient then a T12 ballast and a T8 bulb? A:Depends on the CURRENT through the tube. When the Tube is run at 100% of rating, The T12 Takes more CURRENT to give a certain Brightness. Because the surface of the T8 is closer to the ion stream through the tube, it takes less CURRENT to light up the T8 to the same brightness. However, IF you use a T12 in a T8 ballast, you will get LESS CURRENT through the tube, and LESS POWER consumed ALONG with LESS Light.
Yes and no. It can run without a starter, but it can't start. The starter stores energy and releases it all at once, causing a higher voltage. The gas in the tube has a higher resistance when not lit, so it takes more voltage to start it glowing. Once it is glowing, the resistance is lower, so it can run without a starter.
A fluorescent light starter is responsible for initiating the arc in the mercury vapor inside the tube. On fluorescent tubes with filaments at each end it also provides a delay for the filaments to heat up and evaporate mercury before trying to initiate the arc. The arc is initiated by the starter first permitting current to flow through the ballast coil which builds a strong magnetic field, then suddenly the starter opens the circuit which causes the magnetic field in the ballast coil to collapse, producing a strong inductive kickback and a brief high voltage pulse across the fluorescent tube. This high voltage pulse ionizes the mercury vapor causing it to generate an arc and emit UV light. Once the arc is conducting, the fluorescent tube bypasses both the starter and the ballast coil and neither does anything while the light remains on. There are many different designs of starters that perform this same function in different ways (e.g. bimetallic thermal switch, electromagnet switch, electronic starter). In newer systems with an "electronic ballast" there is no separate starter, instead the electronic starter circuit is built directly into the ballast unit and cannot be independently replaced.
Yes it should, however most flourescent ballast can serve different wattages check the label on the ballast case.