Yes
No. The crank sensor reads the crankshaft location and speed. The cam sensor reads the camshaft.
No, the crank sensor reads crankshaft speed. The cam sensor reads camshaft speed. The cam sensor is on the distributor on a 1999 2.5L
have never heard of a cam angle sensor. the cam does not change angle.it stays put in the bearings
were is the cam shaft sensor
Yes, a camshaft sensor and a camshaft position sensor refer to the same component in an engine. This sensor monitors the position and rotational speed of the camshaft, providing critical data to the engine control unit (ECU) for optimal timing of fuel injection and ignition. While the terms may be used interchangeably, some manufacturers may prefer one term over the other.
Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.
Cam position is taken from the distributor, there is no external cam sensor.
The cam sensor is inside the distributor.The cam sensor is inside the distributor.
Some of the 1992 Rangers had the camshaft position sensor on top of the engine in the same hole where the distributor used to be. Some Ranger engines did not use a camshaft sensor at all.
The cam sensor is not adjustable.
You locate cam-sensor check for loose or broken wires ,if this doesn't work replace cam-sensor.
Cam position is taken from the distributor. There is no separate cam sensor.