Want this question answered?
By heating it up then the steam hitting a condesing tube which then drops into a container
un tube
Hydrogen gas (H2) is not very soluble in water, and so it will displace the water in the container, thus making the level rise.
You will need a special filler tube. The filler tube comes with the container of mineral oil purchased from a Jaguar dealership. I got lucky and was able to acquire the special part from my local mechanic instead of a dealer. Near the right front nose of the car (with the hood open), you will find the mineral oil reservoir. On the top of the reservoir, you will find a dust cap. Thoroughly clean this area - making certain that nothing foreign (i.e. dirt) would be able to fall into the reservoir and contaminate the system. Remove the dust cap then insert the special filler tube into the top of the reservoir. You will need to give the filler tube nozzle about a quarter turn - locking it into place. You may then pour-in the mineral oil. There should be a clear "indicator window" on the reservoir. You know you have added enough mineral oil to the vehicle when the indicator turns green. Disconnect the filler tube nozzle and re-install the dust cap. When you are done, do not throw the container (or more specifically the filler tube nozzle) away. The next time you need mineral oil, you can purchase mineral oil from somewhere other than Jaguar (I use Castrol Mineral Oil). By reusing the Jaguar brand container / nozzle, you can save yourself a trip to the Jag dealership and, thus, some money! I suggest that you keep-up with this maintenance and if you get a low brake pressure indicator, get yourself some mineral oil immediately. I kept putting this off on my XJ6 and found myself a hundred miles from home with only about 10% braking capability (and without my special filler tube)! I hope that helps! - Keith Fieler
Because of gravity, water and most liquids seek their own level. This means that if left side by side, gravity would not be able to move the water in any direction. But if you were to move one container lower than the other then water could move in the direction of the lower level container through a tube or pipe that was attached to the bottom of the higher container. But if the tube used to move the water had to be raised higher than the upper container, suction would get the water moving in the direction of the lower container and then gravity would take over and the water would continue to move without further suction. A siphon doesn't "defy" gravity to work, but uses gravity to perform the siphoning action.
Warm water and mineral given internally by stomach tube is a normal treatment for colic.Colic treatment should be by a qualified veterinarian.
yes
Yes. Roots takes in mineral salts and water from the ground and transport to other parts of the plant by a "tube" called the xylem(it is also a tissue)
Rise or fall of liquid in a small passage or tube. When a glass tube of small internal diameter is inserted into water, the surface water molecules are attracted to the glass and the water level in the tube rises. The narrower the tube, the higher the water rises. The water is said to "wet" the tube. Water will also be drawn into the fibres of a towel, even if the towel is in a horizontal position. Conversely, if a glass tube is inserted into mercury, the level of the liquid in the tube falls. The mercury does not wet the tube. Capillarity is caused by the difference in attraction of the liquid molecules to each other and the attraction of the liquid molecules to those of the tube.
its just a container to hold fluids
its just a container to hold fluids
Container of liquid/chemical