The easiest way to remove an old brake light switch(also called stop light switch) is to break it off. Simply wedge a screwdriver between the switch and the metal bracket and twist. It will pop right out. The switch has 4 ledges that lock the stop-light switch into place. It's very difficult to remove without breaking it.
the brakes are wired into the turn signal assembly. i had the same problem with my car the middle rear light would light up but not the left or right. if you wedge something in the turn signal you will notice your lights work. there actually was a recall on that part.the switch is actually on the brakes that's what makes them light up when you press it. if the wedge doesn't work then you will have to replace the whole turn signal switch located in steering collum. hope this helps
prism
It is the brakes light switch
where is brake light switch
To control a light with a switch, the switch has to be connected in series with the light fixture.
Light switch was created in 1884.
i think that the light switch is shorting out are the auto light switch shorting for the thumb switch
turn head light switch till it clicks and theses your dome light switch...
I can not understand your question.
(this should be a grammar question) Switch off the light(s).
pull out the light switch