Probably not. We'd need to know what the wire goes to in order to be certain about this.
The white wire on the supply side. There isn't a common on the output side of the ballast.
Ground wire to neutral wire.
the green wire its ground so you have black withe an ground
Connect the ground wire to the exhaust fan housing.
No
The white wire on the supply side. There isn't a common on the output side of the ballast.
look on the distributor cap, there is a slot marked "tach", connect the hot wire there and ground the other wire
you need to attach a wire to the steel frame of the turn table, maybe a screw that's into metal not plastic on the frame of body of the turntable. then connect the wire to the ground terminal on your amp, the terminal should be marked.
It means a wire in the ground.
A loose or corroded ground wire will cause the fuse to blow. Check the ground wires on your brake lights.
That Thermostat is LOW voltage. IT does not have a ground wire. There is no need for a ground. it only opperates on 24 volts. there may be a green wire but it does not mean it is a ground
4 wire connection:Black wire to right turn lamps, front and back.Gray wire to left turn lamps, front and back.White wire to a solid ground on the vehicle.Yellow wire to the flasher terminal marked "L".Blue wire to the flasher terminal marked "P". For pilot light on switch. Not needed if there are dash direction indicator lamps.Connect a fused "Hot" wire from the battery or accessory side of ignition switch to "X"terminal on flasher.
If there is no ground wire connect the ground wire to the neutral wire.
Check the continuity of the ground wire from both the ends. Ensure the ground wire is properly connected to earth / ground terminals
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
Yes, if there in no ground wire that is acceptable on a home with no ground wires.
If the voltage between real ground and the ground wire is not 0.0000 Volt, then the wire is not grounded properly.