0
What else can I help you with?
What is the difference between a normal window air conditioner and a compact window air conditioner?
In winter season split AC is working better than window AC and the heating is not decrease like windpw AC the working system is the same but heating ability is not the same why?
Heating effect of a 5 amp of AC compared to 5 amp of DC?
Electrical current alone has no heating effect. Current through a device, with a voltage across the device will have a heating effect. The equation for calculating it is power = voltage x current, where power is proportional to the heating effect If the AC supply is measured as an RMS voltage and an RMS current and the device is resistive, then the heating effect will be identical to the same values with a DC supply. RMS means the "average" voltage or current of an AC supply whereas the peak AC voltage refers to the highest voltage that is reached on each cycle. However, if the device is not just resistive but is inductive, the heating effect will be lower with an AC supply than with a DC supply. By inductive, we mean that the device has a coil or capacitor, for example, in the circuit. The reasons why are outside the scope of this answer but are explained in many electronics text books, or look up "power factor" on google
Resistive forces in an ac circuit is?
Impedance
Can an ac element be run on DC?
DC voltage can be used to run almost any device utilizing an electric heating element, including resistive baseboard and electric water heaters. In these applications, electrical current flowing in a heating element produces heat due to resistance.
How does the ac generator output is affected by the resistive inductive and capacitive load?
hyhjyjyjy
Why is AC better than DC?
AC power can be transmitted more efficiently than DC.
Which is better for generator testing resistive or inductive loads?
resistive loads are best for testing ..they dont introduce phase changes you may test ac devices almost the same as dc inductive loads bring in lots of other factors that give confusing results
Why natural trend to lagging power factor?
Power factor is the cosine of an AC circuit's phase angle, where the expression phase angle is the angle by which a load current lags or leads the supply voltage.Lagging phase angles and power factors occur in resistive-inductive circuits. Leading phase angles and power factors occur in resistive-capacitive circuits.Most industrial and commercial loads are combinations of heating (resistive) loads and motor (inductive) loads -in other words, resistive-inductive loads. Accordingly, lagging power factors tend to be more common than leading power factors.
Is Liverpool better than ac millan?
yes of course Liverpool is better than ac millan because livepool won the eourpean cup
In a purely resistive AC circuit what have the voltage and current got in common?
both have to confront with resistance.
Do you use the ac volts position when checking the continuity of a resistive coil?
No, you use the ohms position.
Examples of resistive heating?
In a toaster, the house current from the outlet passes through a wire with some resistance. Household electricity is supplied at a nominal 117 volts AC. If 'R' is the resistance of the wire in the toaster, then the power (heat) dissipated by the wire is E2/R = (117)2/R watts of heat. Notice that as long as the voltage remains constant, MORE resistive heat is dissipated from a SMALLER resistance.
