If you are asking if there will be a chemical rection between the copper and steel, such as an explosion, no. Metals have a property called nobility, which measure a metals resistance to corrosion when in contact with another metal. The further apart they are on the nobility scale, the worse the corrosion. Copper and stainless steel are not very far apart. Copper and aluminum are a poor mix. The Galvanic Scale should be checked to see if certain metals in contact will accelerate corrosion.
Iron is formed with aluminium oxide. The reaction is used for welding iron (steel) components.
Pure iron (Fe), mixed with carbon to produce 'steel', Chromium is added to steel to make it resistant to rust. copper, Titanium annd vanadium are the alloys which make it more suitable for specific uses,
copper is cheaper to manufacture and easier to bend then steel
mild steel
steel is an alloy of iron and about 0.1%-0.3% carbon. bronze is an alloy of copper+ tin....( not steel)
IF THE COPPER SULFATE DISSOLVES IN WATER, HAS A BLUE COLOR. WHEN STEEL WOOL IS MIXED WITH COPPER SULFATE,, THE STEEL WOOL DISSAPEARS, A BROWNISH SOLID FORMS, AND THE COLOR OF THE SOLUTION CHANGES FROM BLUE TO GREEN.Copper is produced.
Copper is deposed on the steel wool.
Fe + CuSO4 -> FeSo4 + Cu it's a single replacement reaction The steel wool becomes copper plated.
I believe the Chinese invented brass in ancient china when they mixed copper and steel
Very fast corrosion e.g Fe + 2HCl -----> FeCl2 + H2
copper sulfate, or Cu(SO4)(aq). The first clue we have that it is, in fact, copper sulfate is its reaction with the ammonia solution. When the deep blue color formed(in the reaction), the solution formed is [Cu(NH3)4](OH)2(aq), which gives off a bluish color. Secondly, upon acidification of [Cu(NH3)4](OH)2(aq), we see the solution become practically colorless again, The third clue when potassium ferrocyanide is mixed with copper sulfate, it also forms a red precipitate. And last but not least, when copper sulfate reacts with steel, which is primarily iron, copper is formed. This is why the steel changed to a bronze like metal.mystery=copper sulfate
Mild steel, not copper.
I think basically what happens is a single replacement (or maybe double?) but copper will be drawn from the copper sulfate and form on the outside of the steel wool. If it's a double replacement then something in the steel wool will replace the copper and you'll have a new sulfate solution. I remember doing this lab in chemistry a number of years back, so sorry that I can't remember all the details. T_T
You cannot solder Steel BUT you can braze steel and copper and you can thread steel and then use a copper x female adapter Or finf a steel fitting and use a C x M adapter
Steel and copper are both metals, but copper is the best conductor.
Iron is formed with aluminium oxide. The reaction is used for welding iron (steel) components.
Steel and copper - however, the flame on her torch is covered in gold leaf.