by 2 hours the grout should have been set, may have mixed it tooooo wet. it will eventualy set certainly by overnight.
initialy setting time up to 10min. & final setting time upto 10 hours
Yes - but you are always best off removing a large portion of the old grout before re-grouting. After letting the new grout dry for 48 hours, consider using a grout sealer to make it last longer.
The duration of Lady in Cement is 1.55 hours.
The duration of Cement - film - is 1.58 hours.
up to 72 hours for best results.
if you mean dry enough to seal, most grout companies suggest about 20 to 30 days. most grout will dry enough to walk on in a day
The duration of Romeo Is Bleeding is 1.67 hours.
"Grout is the stuff you apply between tiles to seal them in place. Grout tiles once the adhesive has dried fully (24 to 36 hours later). The best grout is waterproof and mould-resistant; some come ready-mixed. Use a grout float - a rubber-faced tool with foam backing - for large areas. Spread the grout across the tiles at right angles to the joins. Use a damp sponge to remove excess. Once the grout is dry, polish the surface with a dry cotton rag." I was taught by a contractor to apply and clean the grout diagonally.
It can take up to 2 hours for it to stop bleeding.
AnswerMix up a paste of bicarbonate of soda and water. Best to use a paintbrush or something similar to paint the paste onto the grout. Leave for a few hours and then wash off. Grout should be sparkling white. For really stubborn stains, use the same paste on a soft toothbrush and some old fashioned elbow grease.There is a product from Australia that is a broom on mop off grout cleaner no nasties www.pinkstuff.com.au
Spread it evenly, then leave your hands in the cement for 4-6 hours to spread excess cement.
Final Hours at Hammersmith was created on 2006-06-04.