Want this question answered?
Yes. Piano wire is tempered high-carbon steel wire, but is not coated so appears dull gray. Music wire is tempered high-carbon steel wire coated and polished for use on stringed instruments (e.g. hammer dulcimer). However, music wire may also refer to the aforementioned piano wire. Their tensile strengths are identical.
The main difference between cast iron and mild steel is the carbon content. Mild steel has a lower carbon content than cast iron. This makes cast iron brittle, while mild steel is much harder.
force/area = stress (it's the same as pressure)
the rod will be stronger, but will break, the cable will bend under force, but not break. the rod has more tensile and shear strength.
No, A36 is a mild structural steel and tool steel is a high strength alloy steel
Yes. Piano wire is tempered high-carbon steel wire, but is not coated so appears dull gray. Music wire is tempered high-carbon steel wire coated and polished for use on stringed instruments (e.g. hammer dulcimer). However, music wire may also refer to the aforementioned piano wire. Their tensile strengths are identical.
Carbon is primary hardening element in steel. Hardness and tensile strength increases as carbon content increases upto 0.85%. Ductility and weldability decreases as carbon content increases. If the solution of carbon and liquid iron is solidified slowly the carbon tends to separate out in the form of graphite flakes (Grey cast iron). It is easily machinable. If the same iron is cast and colled quickly, it is hard and has a higher tensile strength, is difficult to machine (white cast iron).
both of these are same In some places they are used interchangeabl low carbon steel has 0.05-0.15% carbon mild carbon steel has0.16-0.29% carbon http://www.metalsupplies.com/
Not much, avaliability is the same also. Our default has changed to killed carbon steel.
Carbon steel includes mild steel. Mild carbon steel(as it is referred to) contains .05 - .29% carbon. Medium carbon steel is from .30 - .59%. High carbon steel is from .60 - .99%. Ultra high carbon steel is from 1.00 - 2.00%. Steel is considered carbon steel up to 2.1%. Past that it is considered cast iron. The more carbon in the steel the harder and less ductile and maleable it is and also the more brittle it is. The less carbon in the steel more it will bend and shape without breaking. So in essence carbon adds strength but takes away from its elasticity. For More Details Plz Visit at: steelmkts.com (Like, Ms Ingot, Scrap, Sponge Iron, Pig Iron, TMT, Rebars, Iron Ore, Wire Rod, Angle, Channle, Girder, HR/CR Coils, Billets, Iron Pellets, Rolling, Metals,etc. Prices) OR Call +91-98888-14974 Iron & Steel Price in Mandi Gobindgarh, Steel & Iron Prices Of Ludhiana, Iron & Steel Prices in Mumbai, Steel Prices in Maharashtra, Steel & Iron Prices of Jammu, Iron Prices of Kolkata, Steel & Iron Rates in Durgapur, Steel & Iron Rates in Bangloure, Steel & Iron Rates in Bhavnagar, steel price in Tamil Nadu, Steel & Iron Prices in Chennai, Iron Price in Ahmedabad, steel price of Alang, Iron rates of Ghaziabad, Steel & Iron Price in Hydrabad, steel prices of Jaipur, Iron and Steel Prices in Bhiwari, steel price of Mujaffarnagar, iron & steel Rates in Raipur, iron prices of Rourkela, steel prices in Raigarh, Steel Prices of Nagpur, Iron & steel prices in Orissa
No. Calphalon pans are made of aluminum, not carbon steel.
For ductile materials, the yield stress is always lower than the tensile strength of the material. For brittle material they can usually be considered the same point. Steel is generally considered ductile.
The main difference between cast iron and mild steel is the carbon content. Mild steel has a lower carbon content than cast iron. This makes cast iron brittle, while mild steel is much harder.
There is no way to give an answer - metal prices change daily. Alloy 1090 is expensive for a tool metal but nothing compared with gold. It is carbon and steel with a higher carbon content than other high carbon steel - the more carbon infused, the more expensive the metal. As an example, a cheap tool made from a cheap low carbon steel is $3 - the same tool made from the same weight of high carbon steel might be in the $50 range. Sorry I can't get any more specific but even if there was a place that listed the price on a given day, it would be a lie tomorrow.
force/area = stress (it's the same as pressure)
It's the same as normal steel, (Iron and Carbon) it's just got much less carbon in it.
the rod will be stronger, but will break, the cable will bend under force, but not break. the rod has more tensile and shear strength.