Input When connected to a computer the camera inputs images
An opamp buffer circuit is one where the input signal is connected to the plus input, and the output is connected to the minus input. Within the performance limitations of the opamp, the output will track the input. The advantage of the buffer circuit is that is presents very little load impedance to the input signal, while providing a low impedance from the output to drive whatever circuitry is connected there.
A keyboard is an input device. A modem is both an input and an output device. A CPU is the central processor and is connected to both input and output devices but is itself neither.
Yes and no. It's...hard to explain. The monitor on the terminal is the Output device and the keyboard on the terminal is the input device.
CT ratio is the ratio of primary (input) current to secondary (output) current. A CT with a listed ratio of 4000:1 would provide 1A of output current, when the primary current was 4000A.
The maximum current output of a CT is 5 amps. Connected to a meter this will be full scale. What ever the ratio of the CT will dictate the scale face on the meter. A 500 amp CT's output will be 5 amps at 500 amps on the buss. 250 amps on the buss, the CT will output 2.5 amp or half scale on the meter face.
Input gears are usually small and attached to a rotating shaft. The input gear is connected to an output gears via a belt, band, cable, drive chain, or directly with the output gear. The output gear transmits and magnifies the rotational power received for the input gear.
IC 7402 is different from the other type of IC like 7404,7408,7432 and 7400 when it is connected to have an output desired... if you noticed all i mentioned ic is connected from left to the right. input pin 1 and 2, output pin 3 input pin 4 and 5, output pin 6 input pin 13 and 12, output pin 11 input pin 10 and 9, output pin 8 while in nor gate, to have the desired output it must be connected from right to left... input pin 2 and 3, output pin 1 input pin 5 and 6, output pin 4 input pin 8 and 9, output pin 10 input pin 11 and 12, output pin 13
Because it is an external device connected to the computer that translates user input into output on the screen.
It is both input or output
A USB port is both and input and output port. Depends on what is connected to it as to which is functions as. Connect a camera and it is an input device. Connect a printer and it is an output device. Connect a printer/scanner and it is both.
Accessing an I/O (Input/Output) device refers to using a device that is connected to your computer, such as a monitor for output. The monitor is outputting images. Accessing an input device refers to using something like a mouse, webcam, keyboard, touchscreen etc. to input data on the computer.