Resistance is a concept used for DC (direct currents) whereas impedance is the AC (alternating current) equivalent.
Impedance is a more general term for resistance that also includes reactance.
The difference between high impedance and low impedance is the amount of resistance in an electrical circuit. High impedance means there is a high level of resistance, which limits the flow of current. Low impedance means there is a low level of resistance, allowing for a greater flow of current.
This is similar to "equivalent resistance", but impedance is a more accurate concept in the case of AC.The equivalent resistance (or equivalent impedance) means that if you replace all the resistances under consideration with one equivalent resistance, the result on the circuit will be the same.This is similar to "equivalent resistance", but impedance is a more accurate concept in the case of AC.The equivalent resistance (or equivalent impedance) means that if you replace all the resistances under consideration with one equivalent resistance, the result on the circuit will be the same.This is similar to "equivalent resistance", but impedance is a more accurate concept in the case of AC.The equivalent resistance (or equivalent impedance) means that if you replace all the resistances under consideration with one equivalent resistance, the result on the circuit will be the same.This is similar to "equivalent resistance", but impedance is a more accurate concept in the case of AC.The equivalent resistance (or equivalent impedance) means that if you replace all the resistances under consideration with one equivalent resistance, the result on the circuit will be the same.
Impedance is the complex form of resistance. Impedance takes into account capacitance and inductance in a circuit as well. Impedance can be represented as resistance as a function of frequency.See link.AnswerImpedance is not a 'complex form of resistance'. It is the vector sum of a circuit's resistance and reactance. In electrical engineering, 'resistance' has a very specific meaning, and cannot be used to denote 'opposition'.
Bioelectrical impedance measures the total amount of water in the body, using a special instrument that calculates the different degrees of resistance to a mild electrical current in different types of body tissue.
An impedance triangle has resistance (always positive) in the x axis and reactance (at a right angle to resistance) in the y axis. The line that completes this triangle (the hypotenuse) is the absolute value of the impedance.
Impedance, resistance, and reactance.
resistance is the opposition to the flow of electric charge
That term to me is incorrect it should be capacitance impedance. Resistance is linear impedance. CAPACITANCE will follow a vector caused by the capacitor value.
Impedance is measured in Ohms defined as total resistance to current (Amps) flow
Impedance in an AC circuit is like resistance. In fact, impedance is measured in ohms, just like resistance. Impedance takes into account the fact that current and voltage are often not in phase with each other due to capacitive and inductive reactance.
Actually, its a matter of terminology... Impedance can be used in a DC circuit. We just call it resistance, however, transient analysis would imply a different notation. To be clear, impedance is normally used in AC circuits, and it is the electrical opposition to AC, taking into account not only voltage, but phase angle. In a DC circuit, impedance and resistance are the same thing, simply with a phase angle of zero.
As the source impedance is equal to load impedance, it is assumed that both the resistances are in series. This distributes the whole voltage equally between both the impedance. Hence the PD across external resistance will be 1V.