answersLogoWhite

0

No, it is a mixture, as they are not liquids.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Chemistry

How do you separate sulfur sand iron filings?

Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.


Word equation for mixing sulfur and iron filings?

ironsulphide


What are the steps to separating sulfur iron and sugar?

To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.


What occurs when Iron and Sulfur is mixed with Hydrochloric Acid?

When iron and sulfur are mixed with hydrochloric acid, a chemical reaction occurs where hydrogen gas is released while iron chloride and hydrogen sulfide are formed. Iron chloride is a greenish-yellow solution, and hydrogen sulfide is a colorless gas with a foul smell.


Describe how the properties of iron sulfide are different then iron sulfur?

Iron sulfide is a compound composed of iron and sulfur elements, while iron sulfur refers to a mixture of iron and sulfur elements. Iron sulfide has a specific chemical formula (FeS) and a defined structure, whereas iron sulfur is a general term that does not imply a specific composition or structure.

Related Questions

Is powdered sulfur and iron filling a mixture or a solution?

a mixture


Is iron sulfide a mixture or solution?

Iron sulfide is a pure compound. It can be as in aqueous medium too as a solution.


How do you separate sulfur sand iron filings?

Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.


When a mixture of iron filings and sulfur is put in carbon disulphide in a test tube what can be observed?

When a mixture of iron filings and sulfur is put in carbon disulphide in a test tube, the sulfur will dissolve in the carbon disulphide, leaving behind the iron filings. The iron filings can be separated from the solution using a magnet.


Word equation for mixing sulfur and iron filings?

ironsulphide


2 ways to separate iron filings from sulfur?

Using a magnet: Iron filings are magnetic and can be separated from sulfur by passing a magnet over the mixture. The iron filings will be attracted to the magnet, allowing them to be removed easily. Using a solvent: Sulfur is insoluble in water, so the mixture can be dissolved in a suitable solvent where sulfur remains undissolved. The iron filings can then be filtered out from the solution, leaving sulfur behind.


What are the steps to separating sulfur iron and sugar?

To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.


What occurs when Iron and Sulfur is mixed with Hydrochloric Acid?

When iron and sulfur are mixed with hydrochloric acid, a chemical reaction occurs where hydrogen gas is released while iron chloride and hydrogen sulfide are formed. Iron chloride is a greenish-yellow solution, and hydrogen sulfide is a colorless gas with a foul smell.


What could you use to separate sulfur and iron?

You can use a magnet to separate iron from sulfur since iron is magnetic while sulfur is not. By using the magnet to attract the iron particles, you can separate them from the sulfur.


What elements are found in iron sulfate?

Iron sulfates contain iron, sulfur and oxygen.


Describe how the properties of iron sulfide are different then iron sulfur?

Iron sulfide is a compound composed of iron and sulfur elements, while iron sulfur refers to a mixture of iron and sulfur elements. Iron sulfide has a specific chemical formula (FeS) and a defined structure, whereas iron sulfur is a general term that does not imply a specific composition or structure.


What is A mixture of iron and sulfur can be separated by?

A mixture of iron and sulfur can be separated by using a magnet to attract the iron (which is magnetic) while leaving the sulfur behind. The iron can then be removed, leaving the sulfur as the only component remaining.